# Firewall Manager Dashboard Source: https://docs.wasabihosting.com/firewall-manager Learn how to use our in-house Firewall Manager to protect your application Firewall Manager Dashboard Our custom-built firewall manager is designed to be user-friendly and doesn't require extensive technical experience to operate effectively. At Wasabi Hosting, we provide our clients and resellers with our advanced in-house firewall manager built on **GCore's enterprise-grade DDoS protection infrastructure**. Our platform combines GCore's powerful network protection with an intuitive interface to configure firewall rules, monitor DDoS attacks in real-time, manage IP addresses, and receive instant security notifications through Discord and Telegram. Powered by [GCore's DDoS Protection](https://gcore.com/ddos-protection-gaming), our firewall delivers zero-latency mitigation and multi-layered security specifically optimized for gaming and high-performance applications. ## Dashboard Overview The Firewall Manager dashboard gives you a complete overview of your protected infrastructure at a glance. Key features include: * **IP Address Management** - View and manage all your protected IP addresses * **Quick Actions** - Instant access to firewall rules and notification settings * **Recent Activity** - Monitor login activity and security events * **User-Friendly Navigation** - Easy access to all firewall features from the sidebar ## What is a Firewall Manager? A properly configured firewall is your first line of defense against unauthorized access and attacks. A Firewall or Firewall Manager is a system that helps you to protect your server from unwanted threats and vulnerabilities while also letting it run smoothly. Our firewall leverages **GCore's global network infrastructure** to continuously monitor data packets entering and leaving your server, enforcing predefined rules that allow only legitimate traffic while blocking harmful attacks such as: * DDoS attacks * Unauthorized logins * Hacking attempts * Malicious traffic * And many other threats ## Firewall Protection Modes Firewall Rules Our Firewall Manager offers two protection modes to suit different security requirements: ### Standard Protection (Recommended) Change Firewall Mode Standard Protection automatically protects common game and application ports including: * **FiveM** (30120) * **Minecraft** (25565) * **Web** (80/443) * **SSH** (22) * And many more popular games When you click "Block All Traffic" in Standard Protection mode, these common ports continue working while everything else gets blocked. This mode is perfect for most users as it provides robust protection without requiring manual configuration. ### Advanced Mode (Full Control) Advanced Mode gives you complete control over your firewall rules. Initially, common ports work normally, but if you click "Block All Traffic," ALL ports get blocked. You'll then need to manually create rules to open SSH, Web, and game server ports. Not sure which ports are protected? Click the "Change Mode" button to view detailed information about each protection mode, or ask our support team on Discord. ## Best Practices - Pre-Configured Game Templates Best Practices Our Firewall Manager includes professionally configured protection templates for popular game servers. These templates automatically set up all necessary firewall rules with optimized policies for your specific game: ### Available Game Templates * **FiveM** - Protects main game ports (30120 TCP/UDP) and TXAdmin interface (40120) * **Rust** - Protects game port (28015), query port (28014), RCON (28016), and App+ port (28082) * **Counter-Strike** - Optimized rules for CS 1.6, CS:Source, and CS:GO/CS2 * **Minecraft** - Protection for Minecraft Java and Bedrock editions * **Battlefield** - Templates for Battlefield 2, 3, 4, and query ports * **Arma** - Protection for Arma 2, 3, and Arma Reforger * And many more games Simply click "Install \[Game] Protection" to apply all necessary rules instantly. These templates are maintained and updated by our team to ensure optimal performance and security. Some game templates also include **A2S Query Caching** which significantly improves server browser performance and reduces query-based attack vectors. ## Firewall Rules Firewall Rules are pre-defined instructions that determine whether incoming traffic is allowed or blocked based on factors like source IP, destination port, and protocol. These rules protect your server from unauthorized access, hacking attempts, and DDoS attacks while allowing legitimate connections. ### Creating a Custom Firewall Rule From the dashboard, navigate to the Firewall Rules section and select your IP address. Firewall Rules Overview Click the "+ Add Rule" button to create a new firewall rule. Add Firewall Rule Specify the following parameters: * **Source Port** (Optional) - Restrict traffic from specific source ports * **Protocol** - Select TCP, UDP, or other protocols * **Source IP** (Optional) - Whitelist or restrict specific IP addresses * **Description** - Add a brief note about this rule (max 40 characters) Choose from available **GCore protection policies** or select a pre-configured game template from the dropdown menu. GCore's policies are specifically optimized for different traffic types and provide industry-leading DDoS mitigation. The system includes templates for dozens of popular games. Click "+ Add Rule" to apply the firewall rule to your server. The rule takes effect immediately. ### Managing Firewall Rules From the Firewall Rules interface, you can: * **Add Rule** - Create new firewall rules * **Delete Selected Rules** - Remove multiple rules at once * **Delete All Rules** - Clear all rules (use with caution) * **Block All Traffic** - Emergency button to block all traffic (behavior depends on your protection mode) * **View Best Practices** - Access pre-configured game templates Be careful when using "Block All Traffic" or "Delete All Rules" as these actions can immediately affect your server's accessibility. In Standard Protection mode, common ports remain protected even when blocking all traffic. ### A2S Query Caching Many of our game templates include built-in **A2S (Application to Server) Query Caching**, which significantly enhances server browser performance. A2S Caching stores responses to frequent server queries (player count, server details, map info, etc.) to optimize performance and security. * **Reduced server load** - Caching minimizes direct queries to your game server * **Lower latency** - Players see server information faster in their server browser * **Improved stability** - Less strain on server resources during peak times * **Protection against query floods** - Acts as a buffer against query-based DDoS attacks * **Better server browser visibility** - Faster response times improve your server's listing position Games that currently benefit from A2S Caching include **Counter-Strike** (CS:GO/CS2, CS:Source, CS 1.6), **Team Fortress 2**, **Garry's Mod**, **Rust**, and other Source engine games. This feature is automatically enabled when you use our pre-configured game templates. ## Attack History & Monitoring Attack History Our comprehensive Attack History dashboard, powered by **GCore's advanced threat intelligence**, provides detailed insights into all DDoS attacks targeting your infrastructure. Monitor both real-time and historical attack data with powerful filtering and analytics capabilities. ### Attack History Features The Attack History page displays: * **Total Attacks** - Complete count of all attacks on your infrastructure * **Peak Attack Power** - Maximum attack strength measured in Gbps/Mbps * **Total Attack Time** - Cumulative duration of all attacks * **Affected IP Addresses** - Number of unique IPs targeted * **Attack Type Distribution** - Breakdown of different attack vectors * **Geographic Distribution** - Visual map showing attack source locations * **Custom Date Range Filtering** - Filter attacks by specific time periods ### Detailed Attack Analysis Attack Details Click on any attack to view comprehensive details including: * **Attack ID & Status** - Unique identifier and current state (Completed/Ongoing) * **Target IP Address** - Affected server IP * **Attack Power (Peak)** - Maximum bandwidth reached during the attack * **Packets per Second (PPS)** - Attack intensity measurement * **Start & End Time** - Precise attack timeline * **Duration** - Total length of the attack * **Source IPs** - Number of unique attacking IP addresses * **Alert Type** - Classification of the attack (e.g., ddos\_alert) * **Network Traffic Timeline** - Visual graph showing attack intensity over time ### Advanced Attack Analytics Attack Analytics Our advanced analytics provide deep insights into attack patterns: #### Top Source Countries View the geographic origin of attacks with detailed breakdowns including: * Country flags for easy identification * Traffic volume in Mbps from each country * Packets per second (PPS) from each source #### Top Attack Source IPs Identify the most aggressive attacking IP addresses with: * Individual IP addresses * Traffic percentage contribution * PPS percentage metrics #### Attack Protocols Visualize attack protocol distribution: * UDP flood attacks * ICMP attacks * TCP-based attacks * Protocol-specific pie charts #### Target Ports See which ports were targeted: * Port numbers * Protocol types (UDP/TCP/ICMP) * Traffic percentage per port #### Packet Size Distribution Analyze attack packet characteristics: * Packet size ranges (bytes) * Distribution percentages * Attack pattern identification ## Real-Time Notifications Stay informed about security events instantly with our notification integrations. Receive alerts directly in Discord or Telegram whenever an attack starts or stops. ### Discord Webhook Integration Discord Webhooks Get instant DDoS attack notifications sent directly to your Discord server, even when you're away from the management panel. Discord webhooks allow you to receive real-time notifications about DDoS attacks targeting your IP addresses directly in your Discord server. Each notification includes: * Attack start/stop timestamps * Target IP address * Attack power and intensity * Attack duration * Source information To set up Discord webhooks: 1. Navigate to the **Discord Webhooks** section from the sidebar 2. Click **"+ Create New Webhook"** or **"Create Your First Webhook"** 3. Follow the [webhook setup guide](https://firewall.wasabihosting.com/user/webhooks/guide) 4. Configure your Discord server webhook URL 5. Start receiving instant attack notifications ### Telegram Bot Integration Telegram Notifications Prefer Telegram? Our Telegram bot integration sends the same comprehensive attack notifications directly to your Telegram chat. To set up Telegram notifications: 1. Navigate to the **Telegram** section from the sidebar 2. Click **"+ Add Telegram Bot"** 3. Follow the configuration steps 4. Link your Telegram account 5. Receive instant DDoS attack alerts in Telegram ## Account Security ### Two-Factor Authentication (2FA) Two-Factor Authentication Protect your Firewall Manager account with an additional layer of security using Two-Factor Authentication. Two-factor authentication (2FA) adds an extra security layer to your account by requiring both a password and a verification code from your mobile device. This prevents unauthorized access even if your password is compromised. #### Setting Up 2FA Download and install a two-factor authentication app on your mobile device: * **Google Authenticator** (iOS/Android) * **Authy** (iOS/Android) * **Microsoft Authenticator** (iOS/Android) Navigate to **Account > Two-Factor Auth** in the sidebar and scan the displayed QR code with your authentication app. If you can't scan the QR code, manually enter the provided code into your authentication app. Enter the 6-digit verification code from your app and click **"Enable Two-Factor Authentication"** to activate 2FA on your account. Once enabled, you'll need to enter a verification code from your authenticator app each time you log in to the Firewall Manager. ## Reseller & Enterprise Options Wasabi Hosting offers comprehensive reseller and enterprise solutions for customers looking to resell our DDoS protection services or purchase dedicated servers with large IP allocations. Our Firewall Manager includes a dedicated reseller portal with advanced tools for managing customers, IP addresses, and complete whitelabel customization. Whether you're a hosting provider, game server network, or enterprise client, our reseller program provides everything you need to offer premium DDoS protection under your own brand. The Customer Management interface allows resellers to efficiently manage their entire client base: * **Add New Customers** - Onboard new clients with dedicated firewall access * **View Customer Details** - Monitor client account information and activity * **Delete Customers** - Remove inactive or churned clients * **IP Assignment Tracking** - See which IP addresses are assigned to each customer * **Bulk Operations** - Manage multiple customers simultaneously Customer Management Comprehensive IP address allocation and management for your reseller business: * **Assign IP Addresses** - Allocate protected IPs to specific customers * **Reassign IPs** - Transfer IP addresses between customers as needed * **Revoke Access** - Remove IP assignments from customers * **View IP Pool** - Monitor your available and allocated IP inventory * **Bulk IP Operations** - Manage multiple IPs efficiently IP Management For customers purchasing dedicated servers with large IP allocations, we can provide custom IP blocks and subnet management. Complete whitelabel customization allows you to offer DDoS protection under your own brand: ### Whitelabel Features * **Custom Domain (CNAME)** - Use your own domain for the firewall panel (e.g., firewall.yourdomain.com) * **Custom Logo** - Upload your company logo to replace Wasabi Hosting branding * **Custom Colors** - Adjust the color scheme to match your brand identity * **Custom Branding Elements** - Personalize the interface with your company name and styling * **Cloudflare Captcha Support** - Integrated Cloudflare captcha protection for additional security * **Seamless Client Experience** - Your customers see only your branding, not ours Whitelabeling The whitelabel feature is perfect for hosting companies, game server networks, and managed service providers who want to maintain their brand identity while leveraging **GCore's enterprise-grade DDoS protection infrastructure**. ### Enterprise & Dedicated Server Solutions For larger operations, we offer: * **Dedicated Servers** - Full servers with large IP allocations for maximum control * **Custom IP Blocks** - /24, /23, or larger subnet allocations * **Custom CNAME Domains** - Host the firewall panel on your own domain * **Personalized Onboarding Support** - Dedicated support during setup and migration * **Volume Pricing** - Competitive rates for bulk IP purchases * **Priority Support** - Faster response times and dedicated account management ### Getting Started as a Reseller To access the reseller portal and whitelabel features, you need to be approved as a Wasabi Hosting reseller. Create a support ticket on our [website](https://wasabihosting.com/) or [Discord server](https://discord.wasabihosting.com) expressing your interest in becoming a reseller. Our team will discuss your needs, including: * Number of IPs required * Whitelabel/custom domain requirements * Expected customer volume * Dedicated server options (if applicable) Once approved, our staff will: * Enable reseller access on your firewall account * Configure whitelabel settings * Set up custom CNAME domain (if requested) * Provide onboarding documentation Begin adding customers and managing your DDoS protection business through the reseller portal. ## Conclusion The Wasabi Hosting Firewall Manager is a comprehensive DDoS protection platform built on **GCore's global network infrastructure**, designed to keep your game servers and applications secure. With features ranging from automated game-specific protection templates and dual-mode firewall operation to advanced attack analytics and real-time notifications, you have everything needed to defend against modern cyber threats. ### Key Takeaways * **GCore-Powered Protection** - Enterprise-grade DDoS mitigation built on GCore's global network infrastructure * **Easy Protection Modes** - Choose between Standard Protection for automatic security or Advanced Mode for complete control * **Pre-Configured Templates** - One-click game protection for FiveM, Rust, Minecraft, Counter-Strike, and many more * **A2S Query Caching** - Built-in performance optimization for Source engine games * **Comprehensive Monitoring** - Detailed attack analytics with geographic distribution and protocol analysis powered by GCore's threat intelligence * **Real-Time Alerts** - Instant notifications via Discord and Telegram * **Account Security** - Two-factor authentication to protect your firewall account * **Reseller Ready** - Full whitelabel options with custom domains for hosting providers Whether you're protecting a single game server or managing DDoS protection for hundreds of clients as a reseller, our Firewall Manager provides the tools, insights, and flexibility you need. ## Get Support Have questions or need assistance? Our support team is here to help: Open a support ticket on our website for account and billing inquiries Join our Discord community for technical assistance and real-time support For reseller inquiries, dedicated server purchases, or enterprise solutions, please contact our sales team through either support channel. Every Wasabi Hosting game server ships with always-on DDoS protection at no extra cost, and plans start at €2.99/month. # Arma Reforger Admin Commands & Server Administration Source: https://docs.wasabihosting.com/games/arma-reforger/admin-commands Administer your Arma Reforger server hosting - admin login, in-game chat commands, votekick, RCON, and the Game Master mode explained. Arma Reforger gives server owners several layers of administration: an in-game admin login with chat commands, a permanent admins list, RCON for remote management, and **Game Master** mode as a full live-editing experience. This guide covers all of them, plus what to expect as the tooling matures. Reforger's admin tooling is **still evolving**, and Bohemia adds and changes commands across updates. The commands below are the documented basics; check the official server documentation and update changelogs after major patches. ## Two Ways to Become Admin Set `passwordAdmin` in your server config's `game` block (see [Server Configuration](/games/arma-reforger/server-configuration)): ```json theme={null} "game": { "passwordAdmin": "MyAdminPass123" } ``` In-game, open the chat and type: ``` #login MyAdminPass123 ``` You now have admin rights for the session. Anyone with the password can do this, so share it carefully and rotate it if it leaks. Add player **identity IDs** to the `admins` array in the config. Listed players get admin automatically on join, no password needed: ```json theme={null} "game": { "admins": [ "1a2b3c4d-0000-0000-0000-000000000000" ] } ``` The identity ID is the player's Bohemia account identifier (not their display name). You can find it in server logs when the player connects, or via admin/RCON tooling. This is the safer option for your permanent admin team. ## In-Game Chat Commands Admin commands are typed into the normal in-game chat, prefixed with `#`: | Command | Description | | ------------------- | ---------------------------------------------------------------------------------------------------- | | `#login ` | Log in as admin using `passwordAdmin`. | | `#logout` | Give up admin rights for this session. | | `#kick ` | Kick a player from the server. | | `#restart` | Restart the current mission/scenario. | | `#shutdown` | Shut the server down (it will restart automatically on Wasabi Hosting if the panel is set to do so). | For anything the chat commands don't cover (bans, config changes, mod management), use the [Game Panel](https://panel.wasabihosting.com) Console and File Manager, or grant trusted staff [sub-user access](/server/sub-users) so they can restart the server without your account. ## Votekick Reforger has a built-in vote-kick system so the community can remove disruptive players when no admin is online. Vote behavior (and whether it's enabled) is controlled through the server configuration; recent game versions expose vote tuning options in the config. Check the official server config documentation for the exact keys available on your game version, and test them on a passworded server before relying on them. ## RCON Reforger supports remote administration via the **BattlEye RCon protocol**, configured with the `rcon` block in your server config: ```json theme={null} "rcon": { "address": "0.0.0.0", "port": 19999, "password": "MyRconPass123", "permission": "admin" } ``` * The password must be at least 3 characters and **must not contain spaces**. * `permission` is typically `admin` (full commands), though a monitor-style permission may be available for read-only access depending on version. * Connect with any BattlEye-compatible RCON client, point it at your server's IP and RCON port, and authenticate with the password. From there you can list players, kick, ban, and broadcast messages depending on client and game version support. Anyone with your RCON password can control the server. Use a strong, unique password and consider restricting access to the RCON port with the [Firewall Manager](/firewall-manager). ## Game Master: Admin as a Game Mode Beyond moderation, Reforger's **Game Master (GM)** mode is the in-game "Zeus" experience: a real-time editor where you spawn and command AI, place vehicles and objectives, change weather and time, and shape the battle while players fight through it. Run a GM scenario (for example the Everon GM scenario; see [Server Configuration](/games/arma-reforger/server-configuration) for scenario IDs) and the designated Game Masters get full editor control from inside the game. It's the most powerful "admin tool" Reforger has, and ideal for community events and training nights. ## Related Guides Set passwordAdmin, admins, RCON, and scenarios in the JSON config. Admin and quality-of-life mods from the Workshop. Ready to run your own unit's server? [Get Arma Reforger hosting](https://wasabihosting.com/game-servers/arma-reforger) from €12.49/month, with 24/7 support when you need a hand. # How to Install Mods on an Arma Reforger Server Source: https://docs.wasabihosting.com/games/arma-reforger/install-mods Add Workshop mods to your Arma Reforger server hosting - find mod IDs, edit the mods array in your JSON config, and let clients auto-download on join. Arma Reforger mods come from the official **Arma Reforger Workshop**, Bohemia's own platform, built into the game (not Steam Workshop). Installing mods on your server is refreshingly simple: you list them in your server config, the server downloads them on startup, and every player who joins **auto-downloads the same mods automatically**, on PC and console alike. ## How It Works 1. You add each mod's **ID (GUID)** and name to the `mods` array in your server's JSON config. 2. On the next start, the server downloads the listed mods from the Workshop. 3. Clients joining your server download any mods they're missing before entering, with no manual installs. ## Step 1: Find the Mod ID Every Workshop mod has a unique 16-character hexadecimal ID (a GUID), for example `591AF5BDA9F7CE8B`. Browse the Workshop at [Arma Reforger Workshop](https://reforger.armaplatform.com/workshop). Open a mod's page and the **mod ID is shown on the page and in the page URL**. Copy it exactly. Open **Workshop** from the Reforger main menu, find the mod, and open its details page, where the mod ID is listed. This is handy for confirming a mod actually works on your game version first. ## Step 2: Add Mods to Your Server Config Open your server's JSON config in the [Game Panel](https://panel.wasabihosting.com) **File Manager** and add entries to the `mods` array inside the `game` block: ```json theme={null} "game": { "name": "My Wasabi Modded Server", "scenarioId": "{ECC61978EDCC2B5A}Missions/23_Campaign.conf", "mods": [ { "modId": "591AF5BDA9F7CE8B", "name": "WeaponSwitching" }, { "modId": "5965550F24A0C152", "name": "Where Am I" } ] } ``` * `modId`: the GUID from the Workshop (required). * `name`: human-readable label; helpful for you, and used in logs (required). * `version`: optional. Add `"version": "1.0.1"` to **pin a specific version**; omit it to always run the latest. Pinning avoids surprise breakage when a mod updates, but you must bump it manually. Keep the JSON valid: entries are separated by commas, and the last entry has **no** trailing comma. A malformed `mods` array stops the server from starting. See [Server Configuration](/games/arma-reforger/server-configuration) for the full file layout. ## Step 3: Restart and Verify Restart the server from the panel. Watch the **Console**: the server logs each mod as it downloads and loads. Large mods take time on first start, but subsequent starts reuse the downloaded files. Once it's up, join in-game; your client will auto-download the mod list (see [Join Your Server](/games/arma-reforger/join-server)). ## Scenario Mods Some mods don't just add content, they add entire **scenarios** (game modes or missions). For those: 1. Add the mod to the `mods` array as usual. 2. Change `scenarioId` to the scenario the mod provides. Mod authors list their scenario IDs on the Workshop page, and the server console prints available scenarios from loaded mods at startup. ## Load Order and Dependencies * If a mod **depends on** other mods, list the dependencies in the `mods` array too. The Workshop page shows a mod's dependencies, and missing ones typically cause errors at startup or on join. * The order of entries in the `mods` array generally follows list order for loading. For most content mods order doesn't matter; when two mods patch the same thing, follow the mod author's recommendation. * Fewer, well-maintained mods beat a huge list: every mod adds download time for new players and potential breakage on game updates. ## Common Errors Usually one of: a **typo in the GUID** (check every character, since it must match the Workshop ID exactly), broken JSON syntax (missing comma/quote), or a pinned `version` that no longer exists. The console log names the offending mod. Major Reforger updates frequently break mods until authors update them. If your server fails to load or players crash on join after patch day, temporarily remove the suspect mods from the array, restart, and re-add them once updated versions are published. Their client must be on the same game version and able to download the mods. Have them retry (downloads resume), pre-download the mods from the in-game Workshop, and confirm the mod list hasn't just changed server-side while they were queued. ## Related Guides The full annotated JSON config reference. Admin access, in-game commands, and Game Master. Running lots of mods? NVMe storage and fast CPUs make modded servers start and run smoothly. [Get your Arma Reforger server](https://wasabihosting.com/game-servers/arma-reforger) from €12.49/month. # Arma Reforger Server Hosting - Getting Started Guide Source: https://docs.wasabihosting.com/games/arma-reforger/introduction Everything you need to know about Arma Reforger server hosting at Wasabi Hosting - Conflict, Combat Ops, Game Master, full crossplay, and Workshop mods. Welcome to Arma Reforger server hosting at Wasabi Hosting! Arma Reforger is Bohemia Interactive's military simulation platform built on the modern **Enfusion engine**, the same technology powering the future of the Arma series. Whether you want a persistent Conflict warzone for your unit, a co-op Combat Ops server for friends, or a Game Master sandbox where you build scenarios live, this section covers everything you need to run your server. ## The Enfusion Engine Reforger is the first full game on Enfusion, and it shows: large-scale terrain streaming, realistic ballistics, dynamic weather and time of day, and a physics-driven simulation that keeps dozens of vehicles, AI groups, and players active at once. That simulation runs on the **server's CPU**, which is exactly why hosting hardware matters more for Reforger than for most games. ## Game Modes | Mode | Type | Description | | -------------------- | ----------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | **Conflict** | PvP (up to 128 players) | The flagship mode, where two factions fight for control of Everon or Arland, capturing bases, building supply lines, and pushing the front line in long, persistent rounds. | | **Combat Ops** | Co-op PvE | Small-team missions with randomized objectives, great for tight-knit groups who want tactical co-op without a full Conflict server. | | **Game Master (GM)** | Sandbox / curated | A real-time editor where the Game Master spawns units, vehicles, and objectives while players fight through the scenario: Reforger's "Zeus" experience. | The mode your server runs is set by the `scenarioId` in your server configuration; see [Server Configuration](/games/arma-reforger/server-configuration) for the exact values. ## Full Crossplay Arma Reforger supports **full crossplay between PC, Xbox Series X|S, and PlayStation 5**. You control which platforms can join through the `supportedPlatforms` setting in your server config, so you can run an all-platforms community server or a PC-only hardcore milsim, whichever you prefer. Console players can only see and join servers that have their platform enabled. If you want the biggest possible player pool, enable all platforms. ## Workshop Mods Reforger has its own built-in **Workshop** (no Steam Workshop involved). You add mods to your server's config, the server downloads them on startup, and, best of all, **clients automatically download the same mods when they join**. No manual installs, no mismatched versions, and mods work across PC and console. See [Installing Mods](/games/arma-reforger/install-mods) for the full walkthrough. ## Quick Start Pick a plan on our [Arma Reforger hosting page](https://wasabihosting.com/game-servers/arma-reforger) and choose your location. The server deploys automatically about 2 minutes after payment. Log in to the [Game Panel](https://panel.wasabihosting.com), open the File Manager, and edit your server's JSON config: server name, player cap, crossplay platforms, and the scenario you want to run. See [Server Configuration](/games/arma-reforger/server-configuration). List Workshop mods in the config's `mods` array and restart, and players auto-download them on join. See [Installing Mods](/games/arma-reforger/install-mods). Find your server in the in-game Multiplayer browser, favorite it, and share the name with your unit. See [Join Your Server](/games/arma-reforger/join-server). ## Guides Find your server in the in-game browser, use filters, and understand crossplay and mod downloads. A fully annotated JSON config: ports, crossplay, scenarios, view distances, and more. Add Workshop mods to your server config so clients auto-download them on join. Set up admin access, use in-game commands, RCON, and Game Master. ## Why Host Arma Reforger at Wasabi Hosting? * **CPU that fits the game**: Reforger's simulation (AI, vehicles, projectiles, terrain streaming) is CPU-heavy and loves fast cores with large cache. Our servers run **AMD Ryzen 7950X3D and 9950X** CPUs with DDR5 RAM and NVMe SSDs, and the 3D V-Cache on the X3D chips is a genuine advantage for Enfusion's workload. * **DDoS protection included**: every server is protected by GCore with 200+ Tbps of filtering capacity, at no extra cost. * **Three locations**: Amsterdam (NL), Frankfurt (DE), and Ashburn (US East), all on our own network (AS215370) and our own hardware, so your milsim unit gets consistent low ping. * **Instant setup**: your server deploys automatically about 2 minutes after payment. * **Full control**: the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) gives you a live console, File Manager for editing your JSON config, one-click [backups](/server/backups), schedules, [sub-users](/server/sub-users) for your co-admins, and SFTP access. * **Painless upgrades**: need more slots for a bigger Conflict server? Upgrade at any time and keep all your files. Arma Reforger server hosting from **€12.49/month**, online roughly 2 minutes after payment, with DDoS protection and 24/7 support included. ## Need Help? Our team is available around the clock. Open a [support ticket](https://billing.wasabihosting.com/submitticket.php), join our [Discord](https://discord.wasabihosting.com), or email [hello@wasabihosting.com](mailto:hello@wasabihosting.com). # How to Join an Arma Reforger Server Source: https://docs.wasabihosting.com/games/arma-reforger/join-server Find and join your Arma Reforger server from PC, Xbox, or PlayStation using the in-game server browser - with crossplay notes and mod auto-download tips. Arma Reforger uses a single in-game **Multiplayer server browser** on every platform, so PC, Xbox Series X|S, and PlayStation 5 all join the same way. This guide shows you how to find your Wasabi Hosting server, save it as a favorite, and what to expect the first time you join a modded server. ## Before You Start: Know Your Server Details If it's your own server, grab the details players will search for: Log in to the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) and select your Arma Reforger server. The **IP address and game port** are shown on the server overview. The name players search for is the `name` value in the `game` block of your server config; see [Server Configuration](/games/arma-reforger/server-configuration). Make it distinctive. Check the Console shows the server fully started (scenario loaded, no errors). A server that's still downloading mods won't appear in the browser yet. ## Joining via the Server Browser From the Arma Reforger main menu, select **Multiplayer**. The server list loads automatically, though it can take a few seconds to populate fully. Use the **search field** at the top of the browser and type your server's name exactly as set in your config (the `name` value in the `game` block; see [Server Configuration](/games/arma-reforger/server-configuration)). Unique names are much easier to find, so avoid generic names like "Conflict Server". The browser includes filters for **crossplay**, **modded/unmodded**, **official vs. community**, player count, and version. If your server doesn't appear, clear all filters first, since an active "unmodded only" filter will hide a modded server, for example. Select the server and press **Join**. Once you've found it, mark it as a **favorite** (star icon) so it appears under your favorites filter next time without searching. The search field also accepts direct address input on PC. Try entering your server's `IP:port` (for example `203.0.113.10:2001`) to filter straight to your server. Your server's address and port are shown in the [Game Panel](https://panel.wasabihosting.com). ## Mods Download Automatically If the server runs Workshop mods, Reforger downloads them **automatically when you join**, so you don't install anything manually. Keep these points in mind: * The first join on a heavily modded server can take **several minutes to much longer**, depending on total mod size and your connection. * Downloads resume if interrupted, and already-downloaded mods are reused across servers. * This works on **consoles too**: Xbox and PlayStation players download the same Workshop mods. Server owners: the fewer and smaller the mods, the faster new players get in. See [Installing Mods](/games/arma-reforger/install-mods) for how mods are added server-side. ## Crossplay Notes * Console players can only see servers that have **their platform enabled** in the server's `supportedPlatforms` setting. If your Xbox or PlayStation friends can't find the server, that's the first thing to check. * PC players can join any server they're allowed on, including console-enabled ones. * All platforms must be on the **same game version**, so after a game update, wait until both your client and the server have updated. ## Troubleshooting Check, in order: the server is actually **online** (green status in the [Game Panel](https://panel.wasabihosting.com)); all browser **filters are cleared**; `visible` is set to `true` in the server config; and your platform is listed in `supportedPlatforms`. If it just started, give it a minute, since new servers can take a moment to register with the browser backend. Arma Reforger updates require the **server and client to run the same version**. On patch day, update your game client, then restart the server from the panel so it pulls the new server build. Modded servers may additionally need mod updates, and outdated mods can block joining until their authors update them. Reforger shows current/max players in the browser. If the server is at its `maxPlayers` cap, you'll need to wait for a slot and retry, so keep the server favorited and refresh. Server owners can raise `maxPlayers` (up to 128) in the config, though higher counts need more server resources. Cancel and rejoin, and downloads resume where they left off. If a specific mod repeatedly fails, it may have just been updated or removed from the Workshop; ask the server admin to check the mod list. You can also pre-download mods from the in-game **Workshop** menu before joining. ## Related Guides Set your server name, crossplay platforms, and player cap. Add Workshop mods that clients auto-download on join. Don't have a server yet? [Get your own Arma Reforger server](https://wasabihosting.com/game-servers/arma-reforger) from €12.49/month, deployed in about 2 minutes with DDoS protection included. # Arma Reforger Server Configuration Guide Source: https://docs.wasabihosting.com/games/arma-reforger/server-configuration Configure your Arma Reforger server hosting with a fully annotated JSON config - ports, crossplay platforms, scenarios, view distances, RCON, and BattlEye. Arma Reforger dedicated servers are configured with a single **JSON config file**. It controls everything from your server name and player cap to crossplay platforms, the scenario (game mode) you run, and performance-related settings like view distances. This guide walks through a complete example and explains every important block. JSON is strict: a single missing comma, stray quote, or unclosed brace will prevent the server from starting. After editing, run your config through a JSON validator (or the panel's editor syntax highlighting) before restarting. Take a [backup](/server/backups) before major changes. ## Annotated Example Config ```json theme={null} { "bindAddress": "0.0.0.0", "bindPort": 2001, "publicAddress": "", "publicPort": 2001, "a2s": { "address": "0.0.0.0", "port": 17777 }, "rcon": { "address": "0.0.0.0", "port": 19999, "password": "MyRconPass123", "permission": "admin" }, "game": { "name": "My Wasabi Conflict Server", "password": "", "passwordAdmin": "MyAdminPass123", "admins": [], "scenarioId": "{ECC61978EDCC2B5A}Missions/23_Campaign.conf", "maxPlayers": 64, "visible": true, "crossPlatform": true, "supportedPlatforms": [ "PLATFORM_PC", "PLATFORM_XBL", "PLATFORM_PSN" ], "gameProperties": { "serverMaxViewDistance": 2500, "networkViewDistance": 1000, "serverMinGrassDistance": 50, "disableThirdPerson": false, "fastValidation": true, "battlEye": true }, "mods": [] } } ``` ## Network Settings | Setting | Default | Description | | ------------------------------ | --------- | ----------------------------------------------------------------------------------------------------------------------------------------------------- | | `bindAddress` | `0.0.0.0` | The local address the server listens on. Leave as-is on Wasabi Hosting. | | `bindPort` | `2001` | The main **game port (UDP)**. On our platform this is preassigned, so use the port shown in your [Game Panel](https://panel.wasabihosting.com). | | `publicAddress` / `publicPort` | None | The address and port advertised to the server browser. Usually your server's public IP and the same port as `bindPort`. | | `a2s.port` | `17777` | The **query port** used by the server browser and query tools to read server info. | | `rcon.port` / `rcon.password` | None | Remote console access. The password **must not contain spaces** and needs at least 3 characters. Remove the whole `rcon` block if you don't use RCON. | On managed hosting, ports are assigned per server. Don't change ports arbitrarily; use the values configured for your service, visible in the panel. Firewall rules for these ports can be managed in the [Firewall Manager](/firewall-manager). ## The `game` Block | Setting | Description | | -------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | `name` | Server name shown in the browser. Make it unique and searchable. | | `password` | Join password. Empty string = public server. | | `passwordAdmin` | Password admins use in-game with `#login`; see [Admin Commands](/games/arma-reforger/admin-commands). | | `admins` | List of player identity IDs granted admin automatically, no password needed. | | `maxPlayers` | Player cap, **up to 128**. Higher counts increase CPU and bandwidth demands. | | `visible` | `true` to list the server in the public browser, `false` to hide it. | | `crossPlatform` / `supportedPlatforms` | Enable crossplay and choose platforms: `PLATFORM_PC`, `PLATFORM_XBL` (Xbox), `PLATFORM_PSN` (PlayStation). Console players only see servers with their platform listed. | | `scenarioId` | The scenario (mission) the server runs; this selects your game mode. | | `mods` | Workshop mods the server loads and clients auto-download; see [Installing Mods](/games/arma-reforger/install-mods). | ### Choosing a Scenario The `scenarioId` points to a mission config inside the game (or inside a mod). Common vanilla examples: | Game Mode | scenarioId | | -------------------- | --------------------------------------------- | | Conflict (Everon) | `{ECC61978EDCC2B5A}Missions/23_Campaign.conf` | | Game Master (Everon) | `{59AD59368755F41A}Missions/21_GM_Eden.conf` | Exact scenario IDs can change or grow with game updates, and mods add their own. The in-game **Workshop page of a scenario mod** and the official Bohemia server documentation list the current IDs. Scenario mods provide their own `scenarioId` values to use here. ## The `gameProperties` Block | Setting | Typical Value | Description | | ------------------------ | ------------- | ------------------------------------------------------------------------------------------------------------------------------------ | | `serverMaxViewDistance` | `2500` | Maximum view distance (meters) the server allows clients. Higher = prettier, heavier. | | `networkViewDistance` | `1000` | Distance at which entities are network-synced to players. Big performance lever. | | `serverMinGrassDistance` | `50` | Minimum grass render distance enforced on clients (fairness, since it stops players from disabling grass). `0` leaves it to clients. | | `disableThirdPerson` | `false` | Set `true` to force first-person only; popular on hardcore milsim servers. | | `fastValidation` | `true` | Faster validation of client data. Recommended `true` for public servers. | | `battlEye` | `true` | Enables BattlEye anti-cheat. Keep `true` for public servers. | ## Editing Your Config on Wasabi Hosting Log in to the [Game Panel](https://panel.wasabihosting.com), select your server, and open the **File Manager** (see [File Management](/server/file-management)). Locate your server's JSON config file. Make your changes in the built-in editor. Double-check commas, quotes, and brackets, since every setting except the last in a block needs a trailing comma. Save the file, then **Restart** the server from the panel Console. Config changes only apply after a restart. Watch the console output for errors, since an invalid config or wrong `scenarioId` is reported there at startup. Some basic values (like server name or ports) may also be exposed under the panel's **Startup** tab depending on how your service is set up. If a value is managed there, change it there instead so it isn't overwritten. Need more headroom for a 100+ player Conflict server? [Upgrade or order an Arma Reforger server](https://wasabihosting.com/game-servers/arma-reforger) from €12.49/month, with Ryzen X3D hardware included, and upgrades keep all your files. # Install AMX Mod X on a Counter-Strike 1.6 Server Source: https://docs.wasabihosting.com/games/cs16/amx-mod-x Install Metamod and AMX Mod X on your Counter-Strike 1.6 server hosting, add admins, manage plugins, and verify everything works. **AMX Mod X** (AMXX) is the standard admin and plugin platform for Counter-Strike 1.6. It runs on top of **Metamod**, a loader that sits between HLDS and the game code. Together they give you in-game admin commands, votes, stats, and access to thousands of community plugins. This guide walks you through installing both on your hosted server. You'll be editing server files, so keep the [File Manager / SFTP guide](/server/file-management) handy. Taking a [backup](/server/backups) first is a good idea. ## Installation Grab the latest **Metamod** (the community-maintained *Metamod-P* build is recommended) and **AMX Mod X**. You need both the *base* package and the *Counter-Strike addon* package from the official AMX Mod X site. Extract them locally; each produces an `addons/` folder. Merge the extracted folders so you have a single `addons/` containing `metamod/` and `amxmodx/`, then upload it into your server's `cstrike/` directory via the File Manager or SFTP. The result should look like: ``` cstrike/ ├── addons/ │ ├── metamod/ │ │ ├── dlls/ │ │ └── plugins.ini │ └── amxmodx/ │ ├── configs/ │ ├── plugins/ │ └── ... ├── liblist.gam └── server.cfg ``` Open `cstrike/liblist.gam` and change the game DLL line to load Metamod instead of the game directly. Note the original value somewhere so you can revert. Change **only** the line matching your server's operating system: ``` // Windows servers: gamedll "addons\metamod\dlls\metamod.dll" // Linux servers (most hosted servers): gamedll_linux "addons/metamod/dlls/metamod_i386.so" ``` Open (or create) `cstrike/addons/metamod/plugins.ini` and add: ``` win32 addons\amxmodx\dlls\amxmodx_mm.dll linux addons/amxmodx/dlls/amxmodx_mm_i386.so ``` Metamod ignores the lines that don't match the server OS, so it's safe to include both. Restart the server from the [Game Panel](https://panel.wasabihosting.com), then type `meta list` in the panel console. You should see AMX Mod X listed as `RUN`. In-game, type `amx_help` in your console, and if it lists commands, AMXX is alive. ## Making Yourself Admin Admins are defined in `cstrike/addons/amxmodx/configs/users.ini`. Each line is: identity, password, access flags, account flags. Add a line with your SteamID (no password needed), and you're recognized automatically: ```ini theme={null} "STEAM_0:0:123456" "" "abcdefghijklmnopqrstu" "ce" ``` Account flags `ce` mean: `c` = this entry is a SteamID, `e` = no password required. Find your SteamID by typing `status` in your game console while connected to any server. ```ini theme={null} "MyNickname" "MySecretPassword" "abcdefghijklmnopqrstu" "a" ``` Account flag `a` kicks anyone using your name without the right password. Before joining, set your password in the game console: ``` setinfo _pw "MySecretPassword" ``` Reload admins without a restart by typing `amx_reloadadmins` in the console, or just restart the server. ### Access Flags Reference The third field grants permissions. `abcdefghijklmnopqrstu` is full access; common individual flags: | Flag | Grants | | ---- | ------------------------------------------------- | | `a` | Immunity (can't be kicked/banned by other admins) | | `b` | Reserved slot access | | `c` | `amx_kick` | | `d` | `amx_ban`, `amx_unban` | | `e` | `amx_slay`, `amx_slap` | | `f` | `amx_map` (change map) | | `g` | `amx_cvar` (change cvars) | | `h` | `amx_cfg` (execute configs) | | `i` | Admin chat (`amx_chat`, `amx_psay`) | | `j` | Start votes (`amx_vote`, `amx_votemap`) | | `k` | Change `sv_password` | | `l` | `amx_rcon` access | | `u` | Access to admin menus | | `z` | Regular user (no admin) | ## Managing Plugins Plugins are `.amxx` files in `cstrike/addons/amxmodx/plugins/`, and they're switched on and off in `cstrike/addons/amxmodx/configs/plugins.ini`, one filename per line. Disable a plugin by prefixing the line with a semicolon: ```ini theme={null} admin.amxx ; admin base (required) admincmd.amxx ; basic admin commands adminchat.amxx ; admin chat plmenu.amxx ; player menu (kick/ban/slap) mapsmenu.amxx ; map voting menu mapchooser.amxx ; end-of-map vote timeleft.amxx ; time left commands statsx.amxx ; kill/death stats and rankings ;pausecfg.amxx ; disabled example ``` To install a community plugin: upload its `.amxx` file to `plugins/`, add its filename to `plugins.ini`, upload any bundled `.txt` language files or configs it ships with, and restart. Plugin-specific settings usually live in `cstrike/addons/amxmodx/configs/`. Solid, safe picks that ship with AMXX or are community classics: **StatsX** (rankings and HUD stats), **admin chat and menus** (`adminchat.amxx`, `plmenu.amxx`), and **map voting** (`mapchooser.amxx`, `mapsmenu.amxx`). Only download plugins from the official AMX Mod X forums or other trusted sources, and add them a few at a time, since a single broken plugin can crash the server on map change. ## Verifying Your Setup * Panel console: `meta list` → Metamod plugins with `RUN` status. * Panel console: `amxx plugins` → list of loaded AMXX plugins. * In-game console: `amx_help` → paginated list of commands you have access to. * In-game chat: type `/hp` or `/stats` after a kill to confirm StatsX works (if enabled). CS 1.6 server hosting from **€6.49/month** with full file access for AMX Mod X, plus DDoS protection and 24/7 support. # Add Custom Maps to a Counter-Strike 1.6 Server Source: https://docs.wasabihosting.com/games/cs16/custom-maps Upload custom maps to your Counter-Strike 1.6 server hosting, add them to the map rotation, change maps via RCON, and speed up player downloads with FastDL. One of the best parts of running your own Counter-Strike 1.6 server is the map pool: two decades of community maps, including surf, aim, fy, kz, zombie, and remakes of everything imaginable. This guide shows you how to upload maps, put them in rotation, and make sure players download them quickly. ## What Makes Up a Custom Map A map is at minimum a single `.bsp` file, but many maps ship with extra files that must be uploaded too: | File / folder | Goes in | Purpose | | ------------------------------- | ------------------------------------------- | ---------------------------------------------------------- | | `de_mymap.bsp` | `cstrike/maps/` | The map itself (required) | | `de_mymap.res` | `cstrike/maps/` | Resource list; tells clients which extra files to download | | `de_mymap.txt` | `cstrike/maps/` | Map briefing/description shown on join | | `de_mymap.bmp` + `de_mymap.txt` | `cstrike/overviews/` | Radar/overview images | | Custom sounds | `cstrike/sound/...` | Map-specific audio | | Custom models/sprites | `cstrike/models/...`, `cstrike/sprites/...` | Map-specific visuals | | Custom skybox | `cstrike/gfx/env/` | Sky textures | Well-packaged maps come as an archive mirroring the `cstrike/` folder structure. Extract it locally and upload the folders as-is, and everything lands in the right place automatically. ## Uploading Maps In the [Game Panel](https://panel.wasabihosting.com), open your server's **File Manager**, or connect via SFTP for large batches of maps (see [File Management](/server/file-management)). Upload the `.bsp` into `cstrike/maps/` along with any `.res` and `.txt` files, and place sounds, models, sprites, and overviews into their matching folders. In the panel console, switch to it directly: ``` changelevel de_mymap ``` Or from your in-game console using RCON: ``` rcon_password "YourRconPassword" rcon changelevel de_mymap ``` Use the map's exact filename without the `.bsp` extension. ## Adding Maps to the Rotation Edit `cstrike/mapcycle.txt` and add the map name (no extension), one per line: ``` de_dust2 de_mymap cs_assault ``` The rotation advances when `mp_timelimit` or the round limits are hit; see [Server Configuration](/games/cs16/server-configuration). If you installed [AMX Mod X](/games/cs16/amx-mod-x), also add the map to `cstrike/addons/amxmodx/configs/maps.ini` so it shows up in vote menus. ## Speeding Up Downloads with FastDL When a player joins and is missing the map, the server sends it to them. Built-in HLDS transfers are throttled to a crawl, so a 20 MB map can take several minutes, and many players give up. **FastDL** fixes this: you host a copy of your custom files on a regular web server, and clients fetch them over HTTP at full speed instead. Any web host or web server that can serve static files works. You'll upload a folder structure that mirrors `cstrike/`, for example `https://dl.example.com/cstrike/maps/de_mymap.bsp`. Copy your custom `maps/`, `sound/`, `models/`, `sprites/`, `gfx/`, and `overviews/` files to the web server, keeping the same relative paths they have under `cstrike/`. Only custom content is needed, never the default game files. Add to your `server.cfg`: ```cfg theme={null} sv_downloadurl "https://dl.example.com/cstrike/" sv_allowdownload 1 ``` Restart or `exec server.cfg` to apply. Delete the map from your own client's `cstrike/maps/` folder, join the server, and watch the download bar. It should complete in seconds instead of minutes. Without FastDL, HLDS automatically creates compressed `.ztmp` copies of files for its slow built-in transfer, so you don't need to compress anything yourself. With FastDL, files are served uncompressed over HTTP, so just upload them as-is. If a player is missing a file that isn't on the FastDL mirror (or the URL path doesn't match exactly), they'll fall back to slow direct download or fail to join. Keep the mirror in sync every time you add content. ## Keeping Downloads Small * Prefer maps with modest file sizes when possible, because every megabyte of custom sounds and models multiplies across every new player. * Trim unused content: if a map archive ships optional extras (alternate skins, bonus sounds), skip what you don't need. * Audit occasionally: if a map never gets played, remove it from `mapcycle.txt` and the server to keep things tidy. Counter-Strike 1.6 hosting from **€6.49/month**, with NVMe storage, full SFTP access, and 24/7 support included. # Counter-Strike 1.6 Server Hosting - Getting Started Guide Source: https://docs.wasabihosting.com/games/cs16/introduction Everything you need to know about Counter-Strike 1.6 server hosting at Wasabi Hosting - HLDS, AMX Mod X, custom maps, and instant setup. More than two decades after release, Counter-Strike 1.6 is still one of the most played competitive shooters in the world. Its servers are lightweight, endlessly customizable, and home to some of gaming's most dedicated communities. This page gives you an overview of what your CS 1.6 server at Wasabi Hosting can do and points you to the right guide for each task. ## What Your Server Runs Counter-Strike 1.6 servers run on **HLDS** (Half-Life Dedicated Server), Valve's GoldSrc-engine server software. It's extremely light on resources, which means rock-solid tick stability and instant round starts even on busy servers. Your server listens on UDP port `27015` by default, and everything (configs, maps, mods) lives in the `cstrike/` folder that you can edit freely through the Game Panel's File Manager or SFTP. ## Mods, Plugins, and Custom Content The real magic of CS 1.6 hosting is the modding ecosystem built on **Metamod** and **AMX Mod X**: * **AMX Mod X plugins** add admin commands, stats tracking, map voting, knife arenas, surf, zombie mode, deathrun, and thousands of other game modes, all server-side, so players join with a normal client. * **Custom maps** are a single `.bsp` upload away. Run the classics or host community favorites. * **Full config control**: round times, money, friendly fire, gravity, and more through `server.cfg`. The classic map pool ships with every server, including `de_dust2`, `de_inferno`, `de_nuke`, `de_train`, `cs_assault`, `cs_italy`, and `cs_office`. New to CS 1.6 server administration? Install AMX Mod X first, since it gives you in-game admin powers (kick, ban, map change, votes) without ever leaving the game. See [Installing AMX Mod X](/games/cs16/amx-mod-x). ## Why Rent Instead of Self-Hosting? You *can* run HLDS on a home PC, but a rented server solves the problems that kill community servers: | | Self-hosting at home | Wasabi Hosting | | ------------------- | ------------------------------------------- | ------------------------------------------------ | | **Uptime** | Only while your PC is on | 24/7, always joinable | | **Ping** | Depends on your home upload | Low-latency datacenter network (AS215370) | | **DDoS protection** | None; one attack takes you offline | GCore protection (200+ Tbps) included | | **IP address** | Changes with your ISP, exposes your home IP | Static, dedicated `IP:port` | | **Setup** | Manual SteamCMD install and port forwarding | Deployed automatically \~2 minutes after payment | CS 1.6 communities live and die by consistency: players add your server to favorites and expect it to be there every evening. A hosted server makes that effortless. ## Guides Find your server address and connect via the server browser or console. Master server.cfg: round times, money, friendly fire, and ready-made presets. Install Metamod + AMX Mod X and give yourself in-game admin powers. Upload custom maps, set up your map rotation, and speed up downloads with FastDL. ## Why Host Counter-Strike 1.6 at Wasabi Hosting? * **Fast hardware**: AMD Ryzen 7950X3D and 9950X CPUs with DDR5 RAM and NVMe SSDs keep HLDS ticking smoothly. * **DDoS protection included**: GoldSrc servers are frequent attack targets, so every server is shielded by GCore (200+ Tbps) at no extra cost. * **Three locations**: Amsterdam (NL), Frankfurt (DE), and Ashburn (US East), all on our own network and hardware. * **Full file access**: the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) gives you a live console, File Manager, one-click [backups](/server/backups), schedules, and SFTP, all essential for AMX Mod X and custom maps. * **Instant setup**: your server deploys automatically about 2 minutes after payment, and upgrades keep all your files. CS 1.6 server hosting from **€6.49/month**, online roughly 2 minutes after payment, with DDoS protection and 24/7 support included. ## Need Help? Our team is available around the clock. Open a [support ticket](https://billing.wasabihosting.com/submitticket.php), join our [Discord](https://discord.wasabihosting.com), or email [hello@wasabihosting.com](mailto:hello@wasabihosting.com). # How to Join Your Counter-Strike 1.6 Server Source: https://docs.wasabihosting.com/games/cs16/join-server Connect to your Counter-Strike 1.6 server hosting at Wasabi Hosting via the in-game server browser, favorites, or the console connect command. Once your Counter-Strike 1.6 server is online, there are three ways to join it: the in-game server browser, your favorites list, or the console. This guide covers all three, plus password-protected servers and the most common connection problems. ## Finding Your Server Address Go to the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) and sign in with your panel credentials. Click your CS 1.6 server in the server list to open its dashboard. Your server address is shown on the dashboard in the format `IP:port` (for example `203.0.113.10:27015`). Click it to copy it to your clipboard. The default Counter-Strike 1.6 port is UDP `27015`. If your server was assigned a different port, always include it, because `connect` without a port assumes `27015`. ## Joining via the Server Browser Launch Counter-Strike 1.6 and click **Find Servers** from the main menu. Switch to the **Favorites** tab, click **Add a server** (bottom right), and paste your server's `IP:port`. The server appears in the list with its name, map, and player count. Select the server and click **Connect** (or double-click it). Once it's in your favorites, joining takes two clicks every time. Share the `IP:port` with your community and tell them to add it to **Favorites**. That's how CS 1.6 regulars keep coming back night after night. ## Joining via the Console The console is the fastest way to connect, and the only way to use commands like `retry` and `rcon` later on. In CS 1.6, go to **Options → Keyboard → Advanced...** and check **Enable developer console**. You can also add `-console` to the game's launch options in Steam. Press the backtick/tilde key (`` ` ``) in the main menu or in-game. Type the connect command with your server's address: ``` connect 203.0.113.10:27015 ``` If the connection drops, `retry` reconnects to the last server instantly. ## Password-Protected Servers If the server has `sv_password` set in its [server configuration](/games/cs16/server-configuration), there are two ways to get in: Set your password *before* connecting, then connect as usual: ``` setinfo _pw "yourpassword" connect 203.0.113.10:27015 ``` The password is remembered for the session, so `retry` works without re-entering it. When you join a locked server from **Find Servers**, the game shows a password prompt. Type the password and click **OK**. Locked servers show a lock icon in the browser list. ## Troubleshooting * Check the server is actually running by opening the console in the [Game Panel](https://panel.wasabihosting.com) and looking for map load messages. * Double-check the `IP:port` against the panel dashboard. A wrong port is the most common cause. * If you use the [Firewall Manager](/firewall-manager), make sure a rule isn't blocking your own IP. Errors like *"This server is using a newer/older protocol than your client"* mean your game build and the server build don't match. Make sure your game is fully updated in Steam (right-click **Counter-Strike** → **Properties** → verify game files), then reconnect. Some players use unofficial CS 1.6 clients. These often run older protocol versions (protocol 47 instead of 48) or modified builds that can't connect to an up-to-date HLDS server. We recommend the official Steam version for reliable connections; whether to accommodate other clients is up to you and your community. The password you set with `setinfo _pw` doesn't match `sv_password` on the server. Re-run `setinfo _pw "correctpassword"` and `retry`. Passwords are case-sensitive. The server is sending you custom maps or files. Direct HLDS downloads are slow by design, so if you run lots of custom content, set up FastDL. See [Custom Maps](/games/cs16/custom-maps). Get your own Counter-Strike 1.6 server from **€6.49/month**, deployed in about 2 minutes with DDoS protection included. # Counter-Strike 1.6 Server Configuration (server.cfg) Guide Source: https://docs.wasabihosting.com/games/cs16/server-configuration Configure your Counter-Strike 1.6 server hosting - server.cfg cvars, round times, money settings, map rotation, and ready-to-use casual and competitive configs. Almost everything about how your Counter-Strike 1.6 server plays is controlled by one file: `server.cfg`. This guide explains the settings that matter, how to set up your map rotation and MOTD, and gives you two ready-to-use configs: one for casual public play, one for competitive matches. ## Where the Files Live All configuration lives in the `cstrike/` folder, which you can edit with the Game Panel's [File Manager or SFTP](/server/file-management): | File | Purpose | | ----------------------------------- | -------------------------------------------------- | | `cstrike/server.cfg` | Main server settings, executed on every map change | | `cstrike/mapcycle.txt` | Map rotation, one map name per line | | `cstrike/motd.txt` | Message of the day shown to players on join | | `cstrike/listip.cfg` / `banned.cfg` | IP and SteamID ban lists (managed by the server) | ## Essential server.cfg Settings | Cvar | Default | What it does | | --------------------- | ------- | -------------------------------------------------------------------------------------------- | | `hostname "..."` | None | Server name shown in the browser. Make it memorable. | | `rcon_password "..."` | empty | Remote admin password. **Set a strong one**, since anyone with it fully controls the server. | | `sv_password "..."` | empty | Join password. Leave empty for a public server. | | `mp_timelimit` | `0` | Map time limit in minutes. `0` = no limit (map changes by rounds/votes only). | | `mp_roundtime` | `5` | Round length in minutes (allowed range `1`–`9`). | | `mp_freezetime` | `6` | Seconds players are frozen at round start to buy. | | `mp_friendlyfire` | `0` | `1` enables team damage. | | `mp_autoteambalance` | `1` | Automatically moves players to even out teams. | | `mp_limitteams` | `2` | Max player difference allowed between teams. `0` disables the limit. | | `mp_startmoney` | `800` | Starting money, `800`–`16000`. | | `mp_buytime` | `1.5` | Buy period length in minutes (e.g. `0.25` = 15 seconds). | | `mp_c4timer` | `45` | Seconds until the planted C4 detonates. | | `sv_alltalk` | `0` | `1` lets both teams (and the dead) hear each other's voice chat. | | `sv_gravity` | `800` | World gravity. Lower = moon jumps; fun for fun servers. | | `pausable` | `1` | Set to `0` so players can't freeze the server with the pause command. | Always set `rcon_password` to something long and unique, and set `pausable 0`. These two lines are the difference between *your* server and *everyone's* server. ## Ready-to-Use Configs Open `cstrike/server.cfg` in the File Manager and use one of these as a starting point: ```cfg theme={null} // --- Identity --- hostname "My CS 1.6 Server | Dust2 24/7" rcon_password "ChangeMeToSomethingLong" sv_password "" // --- Rounds & time --- mp_timelimit 25 mp_roundtime 5 mp_freezetime 3 mp_c4timer 45 // --- Teams --- mp_friendlyfire 0 mp_autoteambalance 1 mp_limitteams 2 // --- Economy --- mp_startmoney 1500 mp_buytime 1.5 // --- Misc --- sv_alltalk 1 sv_gravity 800 pausable 0 ``` ```cfg theme={null} // --- Identity --- hostname "My CS 1.6 Match Server" rcon_password "ChangeMeToSomethingLong" sv_password "matchpass" // --- Rounds & time --- mp_timelimit 0 mp_roundtime 1.75 mp_freezetime 10 mp_c4timer 35 // --- Teams --- mp_friendlyfire 1 mp_autoteambalance 0 mp_limitteams 0 // --- Economy --- mp_startmoney 800 mp_buytime 0.25 // --- Misc --- sv_alltalk 0 sv_gravity 800 pausable 1 ``` Competitive rulesets traditionally allow pausing for tactical timeouts (`pausable 1`) and rely on `sv_password` so only the two teams can join. ## Map Rotation (mapcycle.txt) `cstrike/mapcycle.txt` controls which map loads when `mp_timelimit` runs out or the max rounds are reached. One map name per line, **without** the `.bsp` extension: ``` de_dust2 de_inferno de_nuke cs_assault de_train ``` Every map listed must exist in `cstrike/maps/`. Want to run maps that didn't ship with the game? See [Custom Maps](/games/cs16/custom-maps). ## Message of the Day (motd.txt) `cstrike/motd.txt` is shown to every player when they join. It accepts basic HTML, so you can style it or link your community's rules and Discord: ```html theme={null}

Welcome to My CS 1.6 Server!

No cheating. No mic spam. Have fun.

``` ## Applying Changes `server.cfg` is executed automatically on every map change, so your settings persist. To apply edits: Save the file, then either **restart** the server from the [Game Panel](https://panel.wasabihosting.com) or type in the panel console: ``` exec server.cfg ``` From your own game console, authenticate and re-execute the config without leaving the match: ``` rcon_password "YourRconPassword" rcon exec server.cfg ``` You can also change single cvars on the fly, e.g. `rcon mp_startmoney 16000`. Take a quick [backup](/server/backups) before big config experiments, since reverting takes one click. ## Next Steps Config sorted? Add in-game admin powers and community plugins with [AMX Mod X](/games/cs16/amx-mod-x), or expand your map pool with [Custom Maps](/games/cs16/custom-maps). Counter-Strike 1.6 hosting from **€6.49/month**, with full file access, DDoS protection, and 24/7 support included. # Counter-Strike 2 Admin Commands & RCON Guide Source: https://docs.wasabihosting.com/games/cs2/admin-commands Administer your Counter-Strike 2 server hosting at Wasabi Hosting - RCON from the client console, essential commands, and plugin-based admin systems. There are two ways to administer a CS2 server: **RCON**, the built-in remote console that gives you full control with a password, and **plugin-based admin systems** built on Metamod:Source and CounterStrikeSharp, which add in-game menus, per-admin permissions, and proper ban management. Most server owners use RCON for quick control and a plugin for day-to-day moderation. ## Using RCON from Your Client Console RCON lets you run server commands from your own game console while playing. In `game/csgo/cfg/server.cfg` (see [Server Configuration](/games/cs2/server-configuration)): ```bash theme={null} rcon_password "StrongUniquePassword!" ``` Restart or change the map to apply. Connect to the server, open your developer console, and enter: ``` rcon_address 203.0.113.10:27015 rcon_password "StrongUniquePassword!" ``` When you're already connected to the server, setting `rcon_password` alone is usually enough, and `rcon_address` matters when sending commands from outside. Prefix any server command with `rcon`: ``` rcon changelevel de_mirage rcon mp_restartgame 1 ``` Anyone with your RCON password has **full control** of the server. Use a long unique password, never post console screenshots containing it, and rotate it when staff leave. You can also run all of these commands directly from the live console in the [Game Panel](https://panel.wasabihosting.com), with no RCON needed there. ## Essential Commands | Command | What It Does | | ------------------------------------- | --------------------------------------------------------- | | `changelevel de_inferno` | Change to another map | | `mp_restartgame 1` | Restart the match in 1 second (resets scores) | | `mp_warmup_end` | End the warmup phase immediately | | `status` | List connected players with their userids and Steam IDs | | `kick playername` | Kick a player by name | | `kickid ` | Kick a player by userid (from `status`, safer than names) | | `banid ` | Ban a player by userid for N minutes (`0` = permanent) | | `writeid` | Save current bans so they persist across restarts | | `sv_password "scrim"` | Lock the server mid-session (empty string unlocks) | | `say Server restarting in 5 minutes!` | Broadcast a message to all players as the server | Legacy Source ban commands like `banid`/`writeid` have been unreliable in some CS2 builds, and CS2 has no built-in admin permission levels at all. For dependable, persistent bans and per-admin rights, use a plugin-based admin system (below), which is what nearly every community server runs. ## Plugin-Based Admin: Metamod + CounterStrikeSharp For real moderation (admin menus, permission tiers, persistent bans, chat commands like `!kick`), install the community plugin stack: Download the latest CS2 build of [Metamod:Source](https://www.sourcemm.net) and upload it into `game/csgo` via the [File Manager or SFTP](/server/file-management), following the official installation notes for CS2 (which include a small edit to `gameinfo.gi`). Download [CounterStrikeSharp](https://docs.cssharp.dev) (with runtime) and extract it into `game/csgo/addons`. Restart and confirm both load with `meta list` in the console. Add an admin plugin such as **CS2-SimpleAdmin** (or a similar CounterStrikeSharp admin plugin) into the CounterStrikeSharp plugins folder. These provide kick/ban/mute with a database, in-game menus, and chat commands. Admin frameworks use a config file (for CounterStrikeSharp, `configs/admins.json`) where each admin is identified by their **SteamID64** and granted permission flags, for example: ```json theme={null} { "YourName": { "identity": "76561198012345678", "flags": ["@css/generic", "@css/kick", "@css/ban"] } } ``` Flag names vary by plugin, so check its documentation for the exact list. Restart the server, join, and test a gated command (e.g. `!admin` or `css_admin`). If nothing responds, check the server console for plugin load errors. Every CS2 update from Valve can temporarily break Metamod, CounterStrikeSharp, and the plugins on top of them. After a game update, expect your server to need updated plugin builds. Keep a [backup](/server/backups) from before the update, and watch each project's Discord/GitHub for fixed releases before restarting a plugin-heavy server. ## Finding SteamID64s * Run `status` in the console while the player is online, and it lists Steam IDs. * Convert a profile URL to SteamID64 with a lookup site such as [SteamID.io](https://steamid.io). ## Next Steps Set rcon\_password, match rules, and game modes. Change maps and build rotations worth moderating. CS2 server hosting from **€9.99/month** at Wasabi Hosting, with DDoS protection and 24/7 support behind your community. # Counter-Strike 2 Custom & Workshop Maps - Hosting Guide Source: https://docs.wasabihosting.com/games/cs2/custom-maps Run Steam Workshop maps on your Counter-Strike 2 server hosting at Wasabi Hosting - host_workshop_map, collections, map changes, and rotations. The Steam Workshop is where CS2's community maps live: surf and KZ maps, aim trainers, remakes of classic maps, and brand-new competitive layouts. Your dedicated server can download and host these maps directly from the Workshop, keep them updated, and rotate through entire collections. This guide covers the whole workflow. ## Finding Workshop and Collection IDs Every Workshop item has a numeric ID in its page URL: ``` https://steamcommunity.com/sharedfiles/filedetails/?id=3070284539 ^^^^^^^^^^ Workshop ID ``` The same applies to **collections** (curated lists of maps): open the collection page and copy the `id` from the URL. You'll use these IDs in the commands below. ## Set Up a Steam Web API Key CS2 dedicated servers may need a **Steam Web API key** to download Workshop content: Go to [Steam Web API key page](https://steamcommunity.com/dev/apikey), sign in, and register a key (any domain name works, e.g. `localhost`). In the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com), open your server's **Startup** tab and add: ``` -authkey YOURAPIKEYHERE ``` The server can now fetch maps and collections from the Workshop. Treat your API key like a password, and don't paste it in Discord or share config screenshots that include it. ## Hosting a Single Workshop Map Run this in the server console (or via RCON), replacing the ID with your map's Workshop ID: ``` host_workshop_map 3070284539 ``` The server downloads the map (first time only) and switches to it. To make the server **boot** into a workshop map, add the same command as a startup parameter: ``` +host_workshop_map 3070284539 ``` ## Hosting a Workshop Collection To run a whole collection (for example, a set of surf maps): ``` host_workshop_collection 123456789 ``` The server downloads the collection's maps and starts on one of them, with the rest available for rotation and map changes. As a startup parameter: `+host_workshop_collection 123456789`. ## Changing Maps | Command | Use For | | ----------------------------------- | ----------------------------------------------------------------------- | | `changelevel de_mirage` | Switch to an official map already on the server | | `ds_workshop_changelevel ` | Switch to another map from the hosted workshop collection (by map name) | | `host_workshop_map ` | Jump directly to any workshop map by ID | | `ds_workshop_listmaps` | List the workshop maps available in the current collection | Map names in a collection don't always match the Workshop page title. Run `ds_workshop_listmaps` first to see the exact names `ds_workshop_changelevel` expects. ## Map Rotation Basics For official maps, rotation is controlled by **mapgroups**, named lists of maps set at startup: ``` +mapgroup mg_active +map de_inferno ``` When a match ends, the server moves through the maps in the active group. For workshop content, hosting a **collection** effectively becomes your rotation pool; many communities also add a plugin-based RTV/nominate system (via CounterStrikeSharp, see [Admin Commands](/games/cs2/admin-commands)) so players vote on the next map. ## Keeping Maps Updated Workshop maps are versioned by their authors. When your server restarts and loads a map via `host_workshop_map` or a collection, it checks the Workshop and downloads the latest version automatically. A simple way to stay current: * Schedule a daily restart in the Game Panel's **Schedules** tab (quiet hours work best). * Because clients also fetch maps from the Workshop, players automatically get the matching version when they join. If a map behaves strangely after an update, the author may have pushed a broken build, so pin your rotation to alternatives until it's fixed. ## Troubleshooting Check that your `-authkey` startup parameter is set correctly and restart. Also confirm the Workshop item is public, since private or friends-only items can't be downloaded by servers. Very large maps take time on first download. Clients download from Steam themselves, so ask players to wait out the transfer, and keep your server's restart schedule off peak hours so first-downloads happen early. That command only works with maps in the currently hosted collection. Use `ds_workshop_listmaps` to see valid names, or `host_workshop_map` with the ID for maps outside the collection. CS2 server hosting from **€9.99/month** at Wasabi Hosting, where NVMe storage makes workshop downloads and map switches fast. # Counter-Strike 2 Server Hosting - Getting Started Guide Source: https://docs.wasabihosting.com/games/cs2/introduction Everything you need to know about Counter-Strike 2 server hosting at Wasabi Hosting - practice servers, workshop maps, plugins, GSLT, and instant setup. Welcome to Counter-Strike 2 server hosting at Wasabi Hosting! A CS2 dedicated server gives you full control that matchmaking never will: your own practice and scrim environment, community game modes, Steam Workshop maps, and plugin-powered features. This page gives you an overview of what a CS2 server can do and points you to the right guide for each task. ## What You Can Run | Server Type | What It's For | | ---------------------------- | ----------------------------------------------------------------------------- | | **Practice / retake server** | Grenade lineups, prefire practice, retake scenarios with teammates | | **Scrim / match server** | Full 5v5 competitive matches with your own rules and no matchmaking queue | | **Community server** | Public deathmatch, arms race, casual, or custom game modes with your branding | | **Workshop map server** | Surf, KZ, aim maps, and community creations from the Steam Workshop | Game modes are switched with the `game_type` and `game_mode` convars, and maps can come from the official pool or the Workshop; see [Server Configuration](/games/cs2/server-configuration) and [Custom Maps](/games/cs2/custom-maps). ## Plugins: Metamod:Source + CounterStrikeSharp CS2 has no built-in admin or plugin system, so the community standard is a two-part stack: * **Metamod:Source**: the low-level plugin loader that hooks into the server. * **CounterStrikeSharp (CS#)**: a C# scripting framework that runs on top of Metamod and powers most modern CS2 plugins, including admin systems, practice tools, retakes, RTV/nominate, and more. With these installed you can add admin menus, map votes, and gameplay tweaks. See [Admin Commands](/games/cs2/admin-commands) for how admin plugins fit in. CS2 plugins hook into game internals, so a Valve update can temporarily break Metamod or CounterStrikeSharp until the projects release fixes. Plan for occasional maintenance if you run a plugin-heavy server. ## Game Server Login Token (GSLT) To be publicly listed in the community server browser and let players connect reliably, your server needs a free **Game Server Login Token** from Steam: 1. Create it at [Steam Game Server Account page](https://steamcommunity.com/dev/managegameservers) using **App ID 730**. 2. Add it to your server's startup parameters with `+sv_setsteamaccount`. The full walkthrough is in the [Server Configuration guide](/games/cs2/server-configuration). ## Guides Enable the developer console and connect with the connect command. server.cfg, key convars, game modes, and GSLT setup. Host Steam Workshop maps and collections, and set up rotations. RCON usage, essential commands, and plugin-based admin systems. ## Why Host CS2 at Wasabi Hosting? CS2 servers run at high tickrates and reward strong single-core CPU performance, exactly what our platform is built around: * **Top-tier hardware**: AMD Ryzen 7950X3D and 9950X CPUs, DDR5 RAM, and NVMe SSDs for consistent frame times and fast map loads. * **DDoS protection included**: GCore filtering with 200+ Tbps capacity at no extra cost; public CS2 servers are frequent attack targets. * **Three locations**: Amsterdam (NL), Frankfurt (DE), and Ashburn (US East) on our own network (AS215370), keeping ping low for EU and NA players. * **Instant setup**: your server deploys automatically about 2 minutes after payment. * **Full control**: live console, File Manager, [backups](/server/backups), schedules, startup parameters, [sub-users](/server/sub-users), and SFTP via the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com). * **Painless upgrades**: upgrade your plan at any time and keep all your files. Counter-Strike 2 server hosting from **€9.99/month**, online roughly 2 minutes after payment, with DDoS protection and 24/7 support included. ## Need Help? Our team is available around the clock. Open a [support ticket](https://billing.wasabihosting.com/submitticket.php), join our [Discord](https://discord.wasabihosting.com), or email [hello@wasabihosting.com](mailto:hello@wasabihosting.com). # How to Join a Counter-Strike 2 Server - Console Connect Guide Source: https://docs.wasabihosting.com/games/cs2/join-server Connect to your Counter-Strike 2 server hosting at Wasabi Hosting - enable the developer console, use the connect command, and join password-protected servers. Joining your Counter-Strike 2 server takes seconds once you know the console commands. This guide shows you how to enable the developer console, connect directly, handle server passwords, and find your server in the community browser. ## Enable the Developer Console The console is disabled by default in CS2: Launch CS2 and click the **gear icon** to open Settings. Under **Game**, find **Enable Developer Console (\~)** and set it to **Yes**. Press the **`~`** (tilde/backquote) key, just below Escape on most keyboards, to open and close the console at any time. ## Connect to Your Server Your server's IP address and port are shown in the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) on the server overview page. CS2 uses port **27015** by default. Open the console and type: ``` connect 203.0.113.10:27015 ``` Press Enter and you'll load straight into the server. ### Password-Protected Servers If the server has `sv_password` set (common for scrim and practice servers), set your password **before** connecting: ``` password "yourpass" connect 203.0.113.10:27015 ``` If you connect without setting it first, CS2 will simply refuse the connection with a "bad password" message, so set the password and try again. You can combine everything into one line to share with teammates: `password "scrim123"; connect 203.0.113.10:27015`, and they just paste it into their console. ## Community Server Browser and Favorites Your server can also be found without typing commands: * In CS2, open **Play → Community Server Browser** and search for your server's `hostname`. * Public listing requires a valid **Game Server Login Token (GSLT)**; see [Server Configuration](/games/cs2/server-configuration). * In the browser, select your server and add it to **Favorites** so it's one click away next time. Servers you've joined also appear under the browser's history/recent tabs. A brand-new server may take a few minutes after startup to appear in the browser. Direct `connect` always works immediately, listed or not. ## Check Server Status from the Panel Not sure the server is actually up before telling ten friends to join? Open the live **Console** in the Game Panel and run: ``` status ``` The output shows the server's hostname, current map, and connected players. If `status` responds, the server is running and reachable. ## Troubleshooting * Confirm the server shows **Online** in the Game Panel and the console has finished loading the map. * Double-check the IP and port (default `27015`). * Make sure a rule in the [Firewall Manager](/firewall-manager) isn't blocking game traffic. Set `password "yourpass"` in your console before connecting, and ask the owner to confirm the current `sv_password`, as it may have changed after a config edit and restart. The server needs a valid GSLT set via `+sv_setsteamaccount`, and `sv_lan` must be `0`. See the [GSLT section of the configuration guide](/games/cs2/server-configuration). Meanwhile, connect directly by IP. Workshop maps download on first join and large maps can take a minute. If it never loads, the server may be missing its Steam Web API key for workshop downloads; see [Custom Maps](/games/cs2/custom-maps). ## Next Steps Set your hostname, password, game mode, and GSLT. Control the server with RCON from your own console. Get CS2 server hosting from **€9.99/month** at Wasabi Hosting, deployed in about 2 minutes with DDoS protection included. # Counter-Strike 2 Server Configuration - server.cfg, Game Modes & GSLT Source: https://docs.wasabihosting.com/games/cs2/server-configuration Configure your Counter-Strike 2 server hosting at Wasabi Hosting - server.cfg convars, game modes, match settings, and Game Server Login Token setup. Counter-Strike 2 servers are configured through plain-text config files full of **convars** (console variables), plus a few startup parameters. This guide covers where the files live, the convars that matter most, how game modes work, and how to register your Game Server Login Token so your server appears publicly. ## Where Config Files Live Configs are stored in `game/csgo/cfg` inside your server files. Edit them with the **File Manager** in the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) or via [SFTP](/server/file-management). | File | Purpose | | ---------------- | ------------------------------------------------------------------------ | | `server.cfg` | Executed on every map load; put your standard settings here | | `autoexec.cfg` | Executed once at server startup (if configured to run) | | `gamemode_*.cfg` | Valve's per-game-mode defaults; don't edit these, override in server.cfg | A solid starter `server.cfg`: ```bash theme={null} // Identity hostname "Wasabi | 128-slot brainpower arena" sv_password "" // set to require a password to join rcon_password "ChangeMeNow!" // Match rules mp_maxrounds 24 mp_roundtime 1.92 mp_freezetime 15 mp_warmuptime 60 mp_autoteambalance 1 mp_friendlyfire 0 // Keep the server public sv_lan 0 sv_cheats 0 ``` Changes to `server.cfg` apply on the next map change or server restart. ## Key Convars Explained | Convar | Description | | -------------------- | ------------------------------------------------------------------------------------------------------ | | `hostname` | Server name shown in the community browser and scoreboard | | `sv_password` | Join password; empty string means public | | `rcon_password` | Password for remote console access; set a strong one (see [Admin Commands](/games/cs2/admin-commands)) | | `sv_cheats` | Enables cheat-protected commands for everyone (`0`/`1`) | | `mp_maxrounds` | Rounds before the match ends (24 for MR12 competitive) | | `mp_roundtime` | Round length in minutes (e.g. `1.92` = 1:55) | | `mp_freezetime` | Freeze time at round start, in seconds | | `mp_warmuptime` | Warmup length in seconds | | `mp_autoteambalance` | Automatically balance uneven teams (`0`/`1`) | | `mp_friendlyfire` | Whether teammates take damage (`0`/`1`) | | `sv_lan` | Must be `0`, since a LAN server won't authenticate with Steam or list publicly | `sv_cheats 1` unlocks commands like `noclip` and wallhack-style debug views for **every connected player**, and it can flag the session as insecure. Only enable it on private practice servers, never on a public one. ## Game Modes: game\_type and game\_mode CS2 selects its game mode through the combination of two convars, best set as startup parameters (with `+game_type` and `+game_mode`) so they apply before the first map loads: | Mode | `game_type` | `game_mode` | | ----------- | ----------- | ----------- | | Casual | 0 | 0 | | Competitive | 0 | 1 | | Wingman | 0 | 2 | | Arms Race | 1 | 0 | | Deathmatch | 1 | 2 | For example, a deathmatch server would start with: ``` +game_type 1 +game_mode 2 +map de_mirage ``` ## GSLT: Game Server Login Token A GSLT ties your server to your Steam account and is required for public listing in the community browser. Go to [Steam Game Server Account page](https://steamcommunity.com/dev/managegameservers) and sign in. Under *Create a new game server account*, enter App ID **730** (Counter-Strike 2) and an optional memo, then click **Create**. Copy the generated token string from the table. In the Game Panel, open your server's **Startup** tab and add the token via the dedicated field or startup parameter: ``` +sv_setsteamaccount YOURTOKENHERE ``` After a restart, the console should show a successful Steam logon. Your server can now appear in the community browser. Requirements for GSLTs: your Steam account must not be limited, and it needs to own CS2's requirements per Valve's rules. Tokens are banned if the server violates Steam policies, so never share your token. If the account receives a game ban, its tokens stop working. ## Setting the Start Map The map the server boots into is a startup parameter, not a server.cfg setting: * **Official map**: add `+map de_dust2` (or `de_mirage`, `de_inferno`, etc.) to the startup parameters. * **Map group**: add `+mapgroup mg_active` together with `+map` to define which maps are in rotation. * **Workshop maps** use different commands entirely; see [Custom & Workshop Maps](/games/cs2/custom-maps). ## Configuration Tips * Keep one authoritative `server.cfg`. Since it runs on every map change, your settings survive rotations. * Comment your changes (`// like this`) so future you knows why a value was set. * Take a [backup](/server/backups) before large config overhauls. * Test match configs (scrim/competitive rule sets) on a passworded server before opening it to the public. CS2 server hosting from **€9.99/month** on Ryzen 7950X3D/9950X hardware, with stable ticks, low ping, and DDoS protection included. # DayZ Server Admin Tools & Commands Guide Source: https://docs.wasabihosting.com/games/dayz/admin-tools Administer your DayZ server hosting - in-game admin commands, ban and whitelist files, BattlEye RCON tools, and Community Online Tools. DayZ ships with a small set of built-in admin commands, and the community fills the gaps with RCON tools and admin mods. This guide covers the built-in layer first (admin login, kick, lock, shutdown, bans, whitelist), then the tools serious servers actually run day to day. ## Step 1: Set the Admin Password Built-in admin access is controlled by one line in `serverDZ.cfg`: ```cpp theme={null} passwordAdmin = "PickSomethingLongAndUnique"; ``` Edit the file via the [File Manager](/server/file-management) and restart the server. Anyone with this password has full admin powers, so treat it like the keys to the server, and share it only with trusted staff (consider [sub-users](/server/sub-users) for panel access instead of sharing your main account). ## Step 2: Log In and Use Admin Commands In-Game Admin commands are typed into the normal in-game **chat**, prefixed with `#`. Press the chat key while connected to your server. ``` #login YourAdminPassword ``` The server confirms the login in chat. Use the commands below. When you're done, log out with `#logout`. ### Built-in Command Reference | Command | What it does | | ------------------- | -------------------------------------------------------------- | | `#login ` | Authenticate as admin | | `#logout` | Drop admin rights | | `#kick ` | Kick a player from the server | | `#lock` | Lock the server so no new players can join | | `#unlock` | Unlock the server | | `#shutdown` | Shut the server down (the panel restarts it per your settings) | The built-in command set is intentionally small: there is no built-in teleport, item spawn, or god mode. For those you want Community Online Tools (below). ## Bans and Whitelist Two plain-text files in the server directory control who can join. Each takes **one identifier per line** (Steam64 ID or the in-game GUID, depending on your server version, so check the format your server writes when it bans someone): * **`ban.txt`**: every ID listed is refused connection. * **`whitelist.txt`**: when `enableWhitelist = 1` is set in `serverDZ.cfg` (see [Server Configuration](/games/dayz/server-configuration)), *only* the IDs listed may join. Perfect for private community servers. Edit both through the File Manager and restart (or use RCON tools to ban live). Keep a comment-free, one-ID-per-line format, since stray characters can silently break the list. ## BattlEye RCON: Remote Administration Every DayZ server runs **BattlEye**, which exposes an RCON (remote console) interface. RCON tools connect to it from outside the game and let you and your staff kick, ban, broadcast messages, and monitor players without being logged in, even from a phone or a scheduled task. Well-known options, described generically: * **BEC (BattlEye Extended Controls)**: a classic companion tool for scheduled restart warnings, automated broadcast messages, chat filtering, and admin task automation. * **CFTools Cloud**: a hosted management platform with a web dashboard: live player list, kick/ban with audit trail, scheduled broadcasts, and Discord integration. * Various desktop RCON clients, lightweight tools for sending manual RCON commands and watching the player list in real time. RCON connects using the RCON port and password from your BattlEye config (`BEServer_x64.cfg` in the server's `battleye/` folder). Keep that password as secret as `passwordAdmin`. The winning combo for most communities: RCON (or CFTools) for moderation and broadcasts, plus Community Online Tools for hands-on in-game work. ## Community Online Tools: The Practical Admin Toolkit **Community Online Tools (COT)** is the de facto in-game admin mod for DayZ. Once installed, authorized admins get a full UI overlay with: * **Player management**: heal, spectate, kick, and manage any connected player * **Teleportation**: teleport yourself or players anywhere on the map * **Item and vehicle spawning**: spawn any item, weapon, or vehicle for events or testing * **God mode and invisibility**: moderate without being seen or killed * **Weather and time control**: set fog, rain, and time of day live COT is a Steam Workshop mod and requires **CF (Community Framework)**; both go into your `-mod=` parameter, and admins are granted access via COT's permission files. Follow the full workflow in [Installing Mods](/games/dayz/install-mods), where the same steps (upload `@CF` and `@Community-Online-Tools`, copy the `.bikey` files, add to startup parameters) apply. Remember that players must run the same mods as the server, so adding COT means everyone loads it (it's inert for non-admins). Test on a quiet server first, and take a [backup](/server/backups) before introducing new mods. ## Quick Reference: Which Tool for Which Job? | Task | Best tool | | --------------------------------------- | ------------------------------------------------------------------------------- | | Kick a troublemaker right now, in-game | `#kick` or COT | | Ban permanently | `ban.txt` / RCON tool | | Restart warnings and scheduled messages | BEC or CFTools Cloud | | Teleport, spawn items, run events | Community Online Tools | | Private members-only server | `whitelist.txt` + `enableWhitelist = 1` | | Server offline / stuck | Console and power controls in the [Game Panel](https://panel.wasabihosting.com) | DayZ server hosting from **€8.00/month** with full file and startup access for admin tooling, DDoS protection, and 24/7 support. # Install Steam Workshop Mods on a DayZ Server Source: https://docs.wasabihosting.com/games/dayz/install-mods Add Steam Workshop mods to your DayZ server hosting - upload @Mod folders, set the -mod startup parameter, manage .bikey signature keys, and update mods. Mods are where DayZ servers come alive: new weapons, base building, traders, whole new maps. DayZ mods come from the Steam Workshop and follow a simple pattern on the server: each mod is an `@ModName` folder, loaded through the `-mod=` startup parameter, and signed with a key the server must trust. This guide covers the full workflow. ## How DayZ Mods Work Three pieces must line up for a modded server: 1. **The mod files**: an `@ModName` folder in the server's root directory (containing the mod's `addons/` PBOs). 2. **The load order**: the `-mod=` startup parameter listing every mod, separated by semicolons. 3. **The signature key**: each mod ships a `.bikey` file that must be copied into the server's `keys/` folder, because `verifySignatures = 2` makes the server reject unsigned content. And critically: **every player must run the exact same mods** (same versions) or they can't join. The [DZSA Launcher](/games/dayz/join-server) automates this on the client side. ## Installing a Mod Subscribe to the mod on the Steam Workshop using your own DayZ client. Steam downloads it to your PC, so find it in `steamapps/common/DayZ/!Workshop/@ModName` (or `steamapps/workshop/content/221100/`). Upload the entire `@ModName` folder to your server's **root directory** (next to `serverDZ.cfg`) via SFTP; see [File Management](/server/file-management). Mods can be gigabytes, so SFTP beats the browser uploader here. Inside the mod folder you'll find a `keys/` (sometimes `key/`) subfolder containing one or more `.bikey` files. Copy each `.bikey` into the **server's** `keys/` folder. Skip this and every client gets kicked by signature verification. In the [Game Panel](https://panel.wasabihosting.com), open your server's **Startup** tab and add the mod to the `-mod=` parameter, semicolon-separated, no spaces: ``` -mod=@CF;@Community-Online-Tools ``` Restart the server and watch the console. The mod list is printed during startup; errors about missing PBOs or keys show up here immediately. ## Load Order Matters Mods load left to right, and **frameworks must load before the mods that depend on them**. `@CF` (Community Framework) is the classic example, and it must come first: ``` -mod=@CF;@Dabs Framework;@DayZ-Expansion-Core;@DayZ-Expansion;@Community-Online-Tools ``` Each mod's Workshop page lists its dependencies. Anything listed as *required* must be installed too, and placed earlier in the chain. ## Popular Foundation Mods | Mod | What it does | | -------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------- | | **CF (Community Framework)** | The shared library huge numbers of mods depend on. Install it first, load it first. | | **Community Online Tools (COT)** | The standard in-game admin toolkit: teleport, item spawning, player management. See [Admin Tools](/games/dayz/admin-tools). | | **DayZ Expansion** | A modular overhaul with vehicles including helicopters, base building, traders, quests, and a new map UI. Start with `Core` and add the modules you want. | Community maps like **Namalsk** and **Deer Isle** are installed the same way; they're mods that also add a mission you reference in `serverDZ.cfg` (see [Server Configuration](/games/dayz/server-configuration)). ## Updating Mods When a mod updates on the Workshop, clients get the new version automatically, but your server doesn't. Until you update it, players are kicked for version mismatch. Launch Steam; subscribed mods update automatically in your local Workshop folder. Replace the server's `@ModName` folder with the updated one via SFTP. Some updates ship a new `.bikey`. Copy any new key into the server's `keys/` folder (old keys can be removed once no mod uses them). Restart the server. Done. Take a [backup](/server/backups) before big mod updates, because mods that add items interact with your economy files, and rolling back is much easier than untangling broken persistence. ## Common Errors A mod's `.bikey` is missing from the server's `keys/` folder. Check that every mod in `-mod=` has its key present, then restart. Usually a wrong load order (dependency loaded after the mod that needs it) or a typo in `-mod=`, since folder names must match exactly. Check the console output; it names the mod it choked on. The player has a mod (or version) the server doesn't. Point them at the DZSA Launcher, which syncs the exact mod set automatically. Confirm the folder sits in the server root (not inside another folder), and that the name in `-mod=` matches the folder name character for character. On Linux-based servers, file name casing can matter. If a mod inexplicably fails to load, lowercase file names are a known fix; our support team can help. DayZ server hosting from **€8.00/month** with NVMe storage for big mod packs, SFTP access, and 24/7 support. # DayZ Server Hosting - Getting Started Guide Source: https://docs.wasabihosting.com/games/dayz/introduction Everything you need to know about DayZ server hosting at Wasabi Hosting - Chernarus and Livonia, Workshop mods, custom loot economy, and instant setup. DayZ is survival at its most unforgiving: 230+ square kilometers of post-Soviet wilderness, permadeath, and other players who are rarely your friends. Running your own server turns that harsh sandbox into *your* sandbox: your rules, your loot economy, your mods, your community. This page gives you an overview of what your DayZ server at Wasabi Hosting can do and points you to the right guide for each task. ## Chernarus, Livonia, and Beyond Every DayZ server runs one of the official terrains out of the box: * **Chernarus** (`dayzOffline.chernarusplus`): the iconic 230 km² map where DayZ was born. * **Livonia** (`dayzOffline.enoch`): a denser, greener 163 km² terrain with different survival dynamics. Beyond the official maps, the Steam Workshop opens up community terrains like **Namalsk** (brutal cold-weather survival) and **Deer Isle**, installed as mods alongside custom content of every kind. See [Installing Mods](/games/dayz/install-mods) for the workflow. ## What a Dedicated Server Unlocks Public official servers give you vanilla DayZ and nothing else. Your own server gives you control over everything: | | Official servers | Your Wasabi server | | ------------------- | -------------------------- | ----------------------------------------------------- | | **Loot economy** | Fixed | Edit `types.xml`: spawn rates, quantities, lifetimes | | **Mods** | None | Full Steam Workshop support (`-mod=` parameter) | | **Day/night cycle** | Fixed | Configurable time acceleration in `serverDZ.cfg` | | **Persistence** | Wipes on official schedule | You decide, with one-click [backups](/server/backups) | | **Rules & admin** | None | Whitelist, admin tools, RCON, in-game moderation | | **Population** | Random strangers | Your community, optionally password-protected | The most popular starting point for community servers: boost loot slightly, speed up the day cycle so nights aren't half the evening, and add a couple of quality-of-life mods. All of it takes under an hour with the guides below. ## Guides Connect via the DayZ Launcher, DZSA Launcher, or direct IP. Master serverDZ.cfg: player limits, time acceleration, maps, and the loot economy files. Add Steam Workshop mods, manage load order, and handle signature keys. In-game admin commands, BattlEye RCON, and Community Online Tools. ## Why Host DayZ at Wasabi Hosting? DayZ is one of the most demanding survival games to host. The server simulates the entire economy, AI, and persistence for the whole map, and it loves fast single-core performance: * **Fast hardware**: AMD Ryzen 7950X3D and 9950X CPUs with DDR5 RAM and NVMe SSDs, ideal for DayZ's CPU-heavy simulation and frequent persistence writes. * **DDoS protection included**: GCore protection with 200+ Tbps capacity at no extra cost. * **Three locations**: Amsterdam (NL), Frankfurt (DE), and Ashburn (US East), all on our own network (AS215370) and our own hardware. * **Full control**: the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) gives you a live console, File Manager, startup parameters (essential for mods), one-click [backups](/server/backups), schedules for restarts, [sub-users](/server/sub-users), and SFTP access. * **Instant setup**: your server deploys automatically about 2 minutes after payment, and upgrades keep all your files. DayZ server hosting from **€8.00/month**, online roughly 2 minutes after payment, with DDoS protection and 24/7 support included. ## Need Help? Our team is available around the clock. Open a [support ticket](https://billing.wasabihosting.com/submitticket.php), join our [Discord](https://discord.wasabihosting.com), or email [hello@wasabihosting.com](mailto:hello@wasabihosting.com). # How to Join Your DayZ Server Source: https://docs.wasabihosting.com/games/dayz/join-server Connect to your DayZ server hosting at Wasabi Hosting via the official DayZ Launcher, DZSA Launcher for modded servers, or direct IP connect. DayZ connects through a launcher rather than an in-game menu, and if your server runs mods, every player needs the exact same mods loaded. This guide covers the official DayZ Launcher, the community DZSA Launcher (which automates mods), direct connection, and the errors you'll most likely hit on the way. ## Finding Your Server Address Go to the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) and sign in with your panel credentials. Click your DayZ server in the server list to open its dashboard. The dashboard shows your address as `IP:port` (for example `203.0.113.10:2302`). The **game port** defaults to `2302`, and this is the port you connect with. DayZ uses several ports: the game port (default `2302`, UDP) for gameplay and a separate Steam query port for server browsers. When connecting directly, always use the **game port**. ## Option 1: Official DayZ Launcher Start DayZ from Steam, and the **DayZ Launcher** opens before the game. Go to the **Servers** tab and type your server's name or IP into the filter box. Star it as a favorite so it's one click away next time. If the server runs mods, the launcher lists them when you select the server. Subscribe to any you're missing on the Steam Workshop, wait for the downloads, and the launcher enables them for that session. Click **Join**. The game boots with the right mods and connects automatically. ## Option 2: DZSA Launcher (best for modded servers) The community-made **DZSALauncher** (DayZ Standalone Launcher) is the favorite for modded servers because it downloads and enables all required Workshop mods automatically, so players just search and click. Download it from the official DZSA website and point it at your DayZ installation. Search your server by name, or use direct connect with `IP:port` (game port `2302`). DZSA fetches every mod the server reports, verifies versions, and launches the game connected to your server. Running a modded community server? Tell players to use DZSA, since it eliminates virtually all "missing mod" support requests. More on the server side in [Installing Mods](/games/dayz/install-mods). ## Option 3: Direct Connect Both launchers support connecting straight to an address: in the official launcher use the server filter with your IP; in DZSA use **Direct Connect** with `IP:GamePort` (e.g. `203.0.113.10:2302`). Direct connect still requires you to have the server's exact mod set enabled. ## Password-Protected Servers If the server has a `password` set in `serverDZ.cfg` (see [Server Configuration](/games/dayz/server-configuration)), the launcher prompts for it when you join. Share it privately with your community, since there's no way to join without it. ## First-Join Tips * **Login queue**: busy servers queue new connections; the timer counts down automatically, so don't cancel and retry (you'll go to the back). * **Fresh spawn**: new characters spawn along the coast with minimal gear. Your character is tied to that server; each server (or hive) has its own character. * **Persistence**: everything you build or bury lives in the server's storage. As the owner, protect it with regular [backups](/server/backups). ## Troubleshooting Give it a few minutes after startup, as DayZ servers take noticeably longer to boot than most games, especially with mods. Check the console in the [Game Panel](https://panel.wasabihosting.com) for the line indicating the mission has loaded. Filters (map, version, modded) in the launcher can also hide it, so search by IP instead. Client and server game versions must match. If a game update just shipped, update your client in Steam, and note the server needs updating too before anyone can join. Also make sure you're not on the Experimental branch while the server runs Stable (or vice versa). Your loaded mods must match the server's mod list **exactly**: same mods, same versions. Errors mentioning a PBO that is "not part of the server data" mean you have an extra or outdated mod loaded. DZSA Launcher resolves this automatically; in the official launcher, compare your enabled mod list against the server's. If the server logs show signature verification kicks, a mod's `.bikey` is missing from the server's `keys/` folder. That's a server-side fix, covered in [Installing Mods](/games/dayz/install-mods). Verify the `IP:port` against the panel, and if you use the [Firewall Manager](/firewall-manager), confirm no rule is blocking your IP. Get your own DayZ server from **€8.00/month**, deployed in about 2 minutes with DDoS protection included. # DayZ Server Configuration (serverDZ.cfg) Guide Source: https://docs.wasabihosting.com/games/dayz/server-configuration Configure your DayZ server hosting - serverDZ.cfg settings explained, choosing Chernarus or Livonia, time acceleration, and the loot economy files. The heart of every DayZ server is `serverDZ.cfg`, which controls the server name, player limits, time flow, security settings, and which map loads. This guide walks through the settings that matter with an annotated example, shows how to switch between Chernarus and Livonia, and introduces the mission economy files that control loot. ## Editing serverDZ.cfg Open `serverDZ.cfg` in the server's root directory using the Game Panel's [File Manager or SFTP](/server/file-management). Save your changes, then **restart the server** from the [Game Panel](https://panel.wasabihosting.com), because the config is only read at startup. ## Annotated Example ```cpp theme={null} hostname = "My DayZ Server | Boosted Loot | Discord.gg/example"; // Name shown in the server browser password = ""; // Join password; empty = public server passwordAdmin = "ChangeMeNow"; // Admin password for #login (see Admin Tools) maxPlayers = 60; // Player slot limit // --- Security --- verifySignatures = 2; // Verify mod signatures against keys/ folder. Keep at 2 (required value) forceSameBuild = 1; // Kick clients whose game build differs from the server // --- Gameplay --- disable3rdPerson = 0; // 1 = hardcore first-person-only server disableCrosshair = 0; // 1 = no crosshair enableWhitelist = 0; // 1 = only whitelisted players may join // --- Time --- serverTime = "SystemTime"; // "SystemTime" = mirror host clock, or a fixed start like "2015/4/8/17/23" (Y/M/D/H/M) serverTimeAcceleration = 4; // Day runs 4x faster than real time serverNightTimeAcceleration = 8; // Nights run an ADDITIONAL 8x on top (4 x 8 = 32x total at night) serverTimePersistent = 0; // 1 = time continues while the server is empty/offline // --- Messages --- motd[] = { "Welcome to the server!", "Rules: no combat logging.", "Join our Discord!" }; motdInterval = 60; // Seconds between MOTD lines // --- Mission (which map loads) --- class Missions { class DayZ { template = "dayzOffline.chernarusplus"; // Chernarus }; }; ``` Two settings deserve extra care: keep `verifySignatures = 2` (it's the anti-tamper check that keeps modified clients out; see [Installing Mods](/games/dayz/install-mods) for how keys work), and always set a strong `passwordAdmin`. ## Key Settings Reference | Setting | Notes | | ---------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------- | | `hostname` | Browser name. Many owners include loot style and Discord invite. | | `password` / `passwordAdmin` | Join password (optional) and admin login password; see [Admin Tools](/games/dayz/admin-tools). | | `maxPlayers` | Match this to your plan's resources; more players = more CPU and persistence load. | | `verifySignatures` | `2` is the required value in current DayZ versions. | | `forceSameBuild` | `1` prevents confusing joins from mismatched game builds. | | `disable3rdPerson` | `1` creates a first-person-only (1PP) server, a popular hardcore niche. | | `serverTime` | `"SystemTime"` or a fixed date/time string `"YYYY/MM/DD/HH/MM"`. Season affects daylight hours and temperature. | | `serverTimeAcceleration` | General time multiplier. `serverNightTimeAcceleration` multiplies nights further, and most community servers shorten nights so evenings aren't pitch black. | | `enableWhitelist` | `1` restricts joins to the whitelist file; see [Admin Tools](/games/dayz/admin-tools). | | `motd[]` | Array of messages broadcast in-game, rotating every `motdInterval` seconds. | ## Choosing the Map: Chernarus or Livonia The `template` line inside `class Missions` selects the mission, and with it, the map: ```cpp theme={null} class Missions { class DayZ { template = "dayzOffline.chernarusplus"; }; }; ``` ```cpp theme={null} class Missions { class DayZ { template = "dayzOffline.enoch"; }; }; ``` The mission folder with the matching name must exist in `mpmissions/`. Community terrains (Namalsk, Deer Isle, and others) ship their own mission templates as part of their mods; see [Installing Mods](/games/dayz/install-mods). Switching maps means switching missions. Characters and persistence are stored per mission, so players effectively start fresh on the new map. ## The Loot Economy: Mission Files Loot isn't configured in `serverDZ.cfg`. It lives in XML files inside your mission folder, e.g. `mpmissions/dayzOffline.chernarusplus/db/`: | File | Controls | | ----------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------- | | `db/types.xml` | The master loot table, per item: `nominal` (target amount in the world), `min`, `lifetime` (seconds before despawn), `restock`, spawn locations, and flags | | `db/events.xml` | Dynamic events: helicopter crashes, police cars, infected hordes, vehicle spawn counts | | `cfgspawnabletypes.xml` | What spawns *on* items: attachments on weapons, cargo in clothing and vehicles | A tiny `types.xml` example that makes the Mosin more common and longer-lived: ```xml theme={null} 20 28800 1800 10 ``` Economy files are unforgiving: one malformed XML tag can break loot spawning server-wide. Take a [backup](/server/backups) before editing, change a few values at a time, and validate your XML before restarting. ## Applying Changes 1. Save your edits in the File Manager. 2. Restart the server from the panel, since `serverDZ.cfg` and mission files load at startup. 3. Economy changes apply gradually: existing loot follows old lifetimes until it despawns or is restocked. DayZ hosting from **€8.00/month** with full file access, one-click backups, and 24/7 support included. # Enshrouded Server Hosting - Getting Started Guide Source: https://docs.wasabihosting.com/games/enshrouded/introduction Everything you need to know about Enshrouded server hosting at Wasabi Hosting - a persistent co-op survival world for up to 16 players with custom difficulty. Welcome to Enshrouded server hosting at Wasabi Hosting! Enshrouded is a co-op survival action RPG set in the vast, voxel-based world of Embervale, where you fight your way through the deadly Shroud, build elaborate bases, and level up your Flameborn hero with friends. This page explains what a dedicated server gives you and points you to the right guide for each task. ## Why Run a Dedicated Enshrouded Server? Enshrouded supports peer-to-peer co-op, but that world only exists while the host is playing. A dedicated server removes that limitation entirely: * **Persistent world for up to 16 players**: the world keeps existing (and your base keeps standing) whether or not anyone is online. Friends can hop in whenever they want, without waiting for a host. * **Always online, 24/7**: no more "the host went to bed" ending the session for everyone. * **Custom difficulty**: pick a preset like Relaxed, Hard, or Survival, or fine-tune individual gameplay values such as resource yield, enemy damage, and day/night length. * **Permission groups**: Enshrouded's `userGroups` system lets you hand out different passwords for Admin, Friend, and Guest roles, each with its own permissions (like who can kick/ban or edit bases). * **Better performance**: the simulation runs on dedicated server hardware instead of the host's gaming PC, so nobody's frame rate carries the world. ## What You Get With Your Server Every Enshrouded server at Wasabi Hosting comes with full access to the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com): | Feature | What it does | | ---------------- | -------------------------------------------------------------------------------------------------- | | **Console** | Watch server output live and see when the world has finished loading | | **File Manager** | Edit `enshrouded_server.json` and manage world saves directly in the browser (SFTP also supported) | | **Backups** | One-click [backups](/server/backups) of your world, highly recommended before game updates | | **Schedules** | Automate restarts and backups | | **Sub-users** | Give co-admins [panel access](/server/sub-users) without sharing your login | ## Guides Connect through the in-game server browser or Steam favorites, ports explained. A full walkthrough of enshrouded\_server.json: presets, custom settings, and user groups. ## Why Host Enshrouded at Wasabi Hosting? * **Fast hardware**: AMD Ryzen 7950X3D and 9950X CPUs with DDR5 RAM and NVMe SSD storage keep Embervale smooth even with a full 16-player server. * **DDoS protection included**: every server is protected by GCore with over 200 Tbps of filtering capacity, at no extra cost. * **Three locations**: Amsterdam (NL), Frankfurt (DE), and Ashburn (US East), all on our own network (AS215370) and our own hardware. * **Instant setup**: your server deploys automatically about 2 minutes after payment. * **Painless upgrades**: upgrade your plan at any time and keep all your files and world saves. Enshrouded server hosting from **€7.49/month**, online roughly 2 minutes after payment, with DDoS protection and 24/7 support included. ## Need Help? Our team is available around the clock. Open a [support ticket](https://billing.wasabihosting.com/submitticket.php), join our [Discord](https://discord.wasabihosting.com), or email [hello@wasabihosting.com](mailto:hello@wasabihosting.com). # How to Join Your Enshrouded Server Source: https://docs.wasabihosting.com/games/enshrouded/join-server Connect to your Enshrouded server hosting at Wasabi Hosting via the in-game server browser or Steam favorites, with game and query ports explained. There are two reliable ways to join an Enshrouded dedicated server: searching for it in the in-game server browser, or adding it to your Steam server favorites by IP. This guide covers both, plus where to find your server address and how to fix the most common connection problems. ## Game Port vs. Query Port Enshrouded uses two UDP ports, and knowing which is which matters when you join by IP: | Port | Default | Used for | | -------------- | ----------- | ----------------------------------------------- | | **Game port** | `15636/udp` | The actual game connection | | **Query port** | `15637/udp` | Server browser listings and **Steam favorites** | On shared hosting your server may be assigned different ports than the defaults. Always check the actual `IP:port` on your server's dashboard in the [Game Panel](https://panel.wasabihosting.com); the query port is typically the game port plus one. ## Finding Your Server Address Go to the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) and sign in. Select your Enshrouded server from the list to open its dashboard. The dashboard shows your address as `IP:port` (for example `203.0.113.10:15636`). This is the **game port**, so add 1 for the query port when adding Steam favorites. ## Method 1: In-Game Server Browser Launch Enshrouded and select **Play**, then **Join**. Type your server's name (the `name` value from your [server configuration](/games/enshrouded/server-configuration)) into the search field. Give the list a moment, as the browser can take a little while to populate. Select your server and click **Join**. If the server is password-protected, enter the password when prompted. Use a distinctive server name. Searching for "Enshrouded Server" returns hundreds of results; searching for "Wasabi Wanderers PvE" finds yours instantly. ## Method 2: Steam Favorites (Join by IP) This method is more reliable than searching, especially right after the server starts. In Steam, open **View → Game Servers** from the top menu bar. Switch to the **Favorites** tab, click the **+** (add server) button, and enter your server's IP with the **query port**, for example `203.0.113.10:15637`. Confirm to add it. Launch Enshrouded, go to **Play → Join**, and your favorited server appears in the list, ready to join. Steam favorites must use the **query port** (default `15637`), not the game port. Adding `IP:15636` is the single most common reason a server never shows up in the favorites list. ## Password Entry and User Groups If your server uses `userGroups` with passwords, the password each player enters when joining decides which group they land in. For example, the Admin password grants kick/ban rights while the Guest password may be view-and-play only. Hand out the right password to the right people. See [Server Configuration](/games/enshrouded/server-configuration) for how to set the groups up. ## Troubleshooting The server may still be starting. Open the **Console** in the [Game Panel](https://panel.wasabihosting.com) and wait until the log shows the world has finished loading. Enshrouded can take a couple of minutes on first boot while it generates the save. Also verify you added the favorite with the **query port**, not the game port. Double-check the entry in **View → Game Servers → Favorites**. It must be `IP:queryPort` (game port + 1 by default, e.g. `:15637`). Remove the old entry and re-add it with the correct port. When Enshrouded updates on Steam, your client and server must both be on the new version before you can connect. Restart your server from the Game Panel so it installs the update, and let Steam update your client. Take a [backup](/server/backups) before major patches, just in case. If you use the [Firewall Manager](/firewall-manager), make sure no rule is blocking your own IP or the server's UDP ports. Still stuck? Open a [support ticket](https://billing.wasabihosting.com/submitticket.php) or ask in our [Discord](https://discord.wasabihosting.com); we're around 24/7. Get your own Enshrouded server from **€7.49/month**, deployed in about 2 minutes with DDoS protection included. # Enshrouded Server Configuration (enshrouded_server.json) Source: https://docs.wasabihosting.com/games/enshrouded/server-configuration Configure your Enshrouded server hosting: enshrouded_server.json explained - name, ports, slots, difficulty presets, custom game settings, and user groups. Everything about your Enshrouded dedicated server (its name, player slots, difficulty, and permission groups) lives in a single file: `enshrouded_server.json` in your server's root directory. This guide walks through the file section by section and shows you how to edit it safely from the Game Panel. Always edit `enshrouded_server.json` while the server is **stopped**. The server reads the file on startup and can overwrite your changes (or ignore them) if it's running while you edit. ## Editing the File In the [Game Panel](https://panel.wasabihosting.com), open your server and click **Stop**. Wait for the console to confirm it has shut down. Go to the **File Manager** tab and open `enshrouded_server.json` in the server's root directory. You can also edit it over SFTP; see [File Management](/server/file-management). Edit the values you need (details below), then save the file. The file is strict JSON, so a missing comma or quote will prevent the server from loading your settings. Click **Start** and watch the console to confirm the server boots with your new settings. ## Annotated Example ```json theme={null} { "name": "My Enshrouded Server", "saveDirectory": "./savegame", "logDirectory": "./logs", "ip": "0.0.0.0", "gamePort": 15636, "queryPort": 15637, "slotCount": 16, "gameSettingsPreset": "Default", "gameSettings": {}, "userGroups": [] } ``` | Key | What it does | | -------------------- | -------------------------------------------------------------------------------------------------------- | | `name` | The server name shown in the in-game browser. Make it distinctive so players can find it by search. | | `saveDirectory` | Where world saves are written (default `./savegame`). Leave as-is unless you have a reason to change it. | | `logDirectory` | Where server logs are written (default `./logs`). | | `ip` | The address the server binds to. Leave at the value set by our panel. | | `gamePort` | The UDP game port (default `15636`). | | `queryPort` | The UDP query port used by server browsers and Steam favorites (default `15637`). | | `slotCount` | Maximum concurrent players, up to Enshrouded's cap of **16**. | | `gameSettingsPreset` | Difficulty preset: `Default`, `Relaxed`, `Hard`, `Survival`, or `Custom`. | | `gameSettings` | Individual gameplay overrides, only applied when the preset is `Custom`. | | `userGroups` | Named permission groups with their own join passwords. | Do **not** change `ip`, `gamePort`, or `queryPort` on a Wasabi Hosting server. These are pre-configured to match your server's network allocation, and changing them will make the server unreachable. See [Join Your Server](/games/enshrouded/join-server) for how ports are used. ## Difficulty Presets Set `gameSettingsPreset` to one of: | Preset | Experience | | ---------- | ---------------------------------------------------------- | | `Default` | The balanced experience Enshrouded is designed around | | `Relaxed` | Easier survival, friendlier for casual groups and builders | | `Hard` | Tougher enemies and harsher survival mechanics | | `Survival` | The most punishing ruleset for veteran groups | | `Custom` | Uses your own values from the `gameSettings` block | ## Custom Game Settings When the preset is `Custom`, the `gameSettings` object lets you tune individual gameplay values. A few **examples** of the kinds of settings available: | Example setting | What it controls | | ----------------------------- | ------------------------------------------------------- | | Resource yield multipliers | How much you harvest from mining, chopping, and looting | | Enemy damage / health factors | How hard enemies hit and how tanky they are | | Day and night length | How long each part of the day/night cycle lasts | | Player survival factors | Stamina, health, and similar player-side multipliers | The settings above are examples, not a complete reference. The full list of keys (and their exact names and value ranges) is defined by the game. Start the server once on the `Custom` preset and inspect the generated `enshrouded_server.json`, or check the official Enshrouded dedicated server documentation for the current list. ## User Groups and Passwords Instead of a single server password, Enshrouded uses **named user groups**, each with its own password and permission flags. When a player joins and enters a password, the matching group determines what they're allowed to do. ```json theme={null} { "userGroups": [ { "name": "Admin", "password": "ChangeMeAdmin", "canKickBan": true, "canAccessInventories": true, "canEditBase": true, "canExtendBase": true, "reservedSlots": 1 }, { "name": "Friend", "password": "ChangeMeFriend", "canKickBan": false, "canAccessInventories": true, "canEditBase": true, "canExtendBase": false, "reservedSlots": 0 }, { "name": "Guest", "password": "ChangeMeGuest", "canKickBan": false, "canAccessInventories": false, "canEditBase": false, "canExtendBase": false, "reservedSlots": 0 } ] } ``` * **`password`**: what a player types when connecting. Give the Admin password only to people you trust with kick/ban powers. * **`canKickBan`**: allows removing players from the server. * **`canAccessInventories`**: allows opening chests and other storage. * **`canEditBase`** / **`canExtendBase`**: control building inside and expanding base claims. * **`reservedSlots`**: keeps slots free for members of this group even when the server is otherwise full. Replace every default password before sharing your server address. Anyone who knows (or guesses) the Admin password gets full moderation powers. ## World Saves and Backups Your world lives in the folder set by `saveDirectory` (default `./savegame`). Because Enshrouded is actively updated and world data occasionally changes format between patches, take a [backup](/server/backups) from the Game Panel before editing configuration, before game updates, and on a regular schedule. Restoring a backup takes just a couple of clicks. Get your own Enshrouded server from **€7.49/month**, deployed in about 2 minutes with DDoS protection included. # How to Add Admins to Your FiveM Server - txAdmin & ACE Permissions Source: https://docs.wasabihosting.com/games/fivem/add-admins Add admins to your FiveM server hosting at Wasabi Hosting - txAdmin Admin Manager, player identifiers, and ACE permissions in server.cfg explained. FiveM has two separate permission layers, and a well-run server uses both. **txAdmin admins** can use the web dashboard to kick, ban, warn, restart, and manage the whitelist. **ACE permissions** control what players can do *in-game*: admin commands, framework staff menus, and permission-gated resources. Making someone a txAdmin admin does not automatically give them in-game powers, and vice versa. ## Layer 1: txAdmin Admins In the txAdmin web interface (see [txAdmin Setup](/games/fivem/txadmin-setup)), open **Admin Manager** from the menu. Only the master account and admins with the *manage admins* permission can access it. Click **New Admin** and fill in a username. Link the admin's **Cfx.re account** (their forum username) so they can log in with it. You can also link their Discord ID. txAdmin permissions are granular: view console, kick, ban, whitelist, manage settings, and more. Give each staff member only what their role needs. Send them your txAdmin URL. They log in with their Cfx.re account, so there are no passwords to manage. ## Finding a Player's Identifiers For in-game (ACE) permissions you need a player identifier. FiveM players have several: `fivem` (Cfx.re account ID), `license` (Rockstar license hash), `discord` (Discord user ID), and `steam` (only when a [Steam Web API key](/games/fivem/server-cfg) is set). Two easy ways to find them: * **txAdmin**: open **Players**, click the player, and their identifiers are listed in the player modal. * **Live console**: with the player online, run `status` in the console in the [Game Panel](https://panel.wasabihosting.com), which lists connected players; then use txAdmin or your framework's admin tools to view full identifiers. | Identifier | Example | Notes | | --------------------- | --------------------------------------- | ---------------------------------------------------------------- | | `identifier.fivem:` | `identifier.fivem:1234567` | Cfx.re account ID, short and easy to read | | `identifier.license:` | `identifier.license:a1b2c3...` | Rockstar license hash, always present and most commonly used | | `identifier.discord:` | `identifier.discord:123456789012345678` | Discord user ID, only if the player runs Discord alongside FiveM | | `identifier.steam:` | `identifier.steam:110000112345678` | Hex Steam ID, requires `steam_webApiKey` on the server | Prefer `license` or `fivem` identifiers for permanent admin grants, because they're always available, while `discord` and `steam` identifiers depend on how the player launched the game. ## Layer 2: ACE Permissions in server.cfg ACE is FiveM's built-in access control system. You define what a **group** may do with `add_ace`, and put people in groups with `add_principal`. Add these lines to your [server.cfg](/games/fivem/server-cfg) and restart: ```bash theme={null} # Give the admin group access to run commands add_ace group.admin command allow # But explicitly deny the dangerous quit command add_ace group.admin command.quit deny # Add players to the admin group by identifier add_principal identifier.fivem:1234567 group.admin add_principal identifier.license:a1b2c3d4e5f67890a1b2c3d4e5f67890a1b2c3d4 group.admin add_principal identifier.discord:123456789012345678 group.admin ``` | Line | What it does | | ------------------------------------------------- | ----------------------------------------------------------------- | | `add_ace group.admin command allow` | Grants the `group.admin` group permission to use console commands | | `add_ace group.admin "resource.permission" allow` | Grants a specific permission a resource asks for (check its docs) | | `add_principal identifier.fivem:... group.admin` | Puts a specific player (by Cfx.re ID) into `group.admin` | `add_ace group.admin command allow` grants access to **every** registered command, including destructive ones like `stop` and `quit`. For larger staff teams, grant specific commands instead (e.g. `add_ace group.mod command.kick allow`) or pair the broad grant with explicit `deny` rules as shown above. Only give full command access to people you trust with the entire server. ### Group Inheritance Groups can inherit from other groups using `add_principal` between principals: ```bash theme={null} # admins inherit everything moderators can do add_principal group.admin group.moderator add_ace group.moderator command.kick allow add_ace group.admin command.stop allow ``` Here `group.admin` automatically has `command.kick` (inherited) plus `command.stop` (its own). This lets you build a clean staff hierarchy: `user → moderator → admin`. Framework admin systems (QBCore's `qb-adminmenu`, ESX's admin groups, or txAdmin's own in-game menu) layer on top of ACE. Many of them check for specific ACE permissions documented in their READMEs, while others keep their own permission lists in the database. ## Test Your Setup 1. Restart the server so the new `server.cfg` lines load. 2. Join the server with the account you granted. 3. Open the F8 console and try a permission-gated command. For example, `txadmin` scripts respond to `/tx` for txAdmin admins, or test a simple registered admin command from one of your resources. 4. If you get "Access denied", re-check the identifier, since one typo breaks the whole line, and confirm the line appears **after** any framework `ensure` lines that register the permissions. ## Security Best Practices * Never paste `add_principal` lines sent by strangers "to help debug", as this is a common social-engineering trick. * Audit your admin list regularly, in both txAdmin's Admin Manager and server.cfg. * Give [sub-users](/server/sub-users) on the Game Panel only the panel permissions they need. Panel access is a third, separate layer above txAdmin and ACE. * Take regular [backups](/server/backups) so a rogue admin's damage can be rolled back. FiveM server hosting from **€4.80/month** at Wasabi Hosting, with DDoS protection and 24/7 support behind your community. # How to Install FiveM Resources - Scripts, Maps & Vehicles Source: https://docs.wasabihosting.com/games/fivem/install-resources Install scripts, maps, and vehicle resources on your FiveM server hosting at Wasabi Hosting - folder structure, fxmanifest.lua, and load order explained. Resources are how you add everything to a FiveM server: jobs, vehicles, MLO interiors, HUDs, minigames, and entire frameworks. Installing one is simple (upload it, register it in `server.cfg`, restart), but getting the structure and start order right is what separates a stable server from one that floods the console with errors. This guide covers the whole process. ## How the resources Folder Works All resources live in the `resources` folder of your server. Two structural rules matter: * **Category folders use square brackets.** A folder named `[qb]`, `[maps]`, or `[standalone]` is not a resource itself: it's a category that FXServer scans for resources inside it. You can nest categories to keep things tidy. * **Every resource needs an `fxmanifest.lua`.** This manifest tells the server what scripts and files the resource contains. A folder without one (or the legacy `__resource.lua`) is not a valid resource. ``` resources/ ├── [core]/ │ ├── qb-core/ │ │ └── fxmanifest.lua │ └── oxmysql/ │ └── fxmanifest.lua ├── [jobs]/ │ └── qb-police/ │ └── fxmanifest.lua └── [maps]/ └── custom-pd-mlo/ └── fxmanifest.lua ``` The resource name is the folder that **directly contains** `fxmanifest.lua`. If you unzip a download and get `coolscript-main/coolscript/fxmanifest.lua`, upload the inner `coolscript` folder, not the wrapper. Keep resource names lowercase and **without spaces**. ## Installing a Resource The safest places to find resources are the [Cfx.re forum Releases section](https://forum.cfx.re/c/development/releases) and **GitHub** repositories linked from it. Avoid resold or "leaked" scripts, because they frequently contain backdoors that hand strangers admin access to your server. Open the **File Manager** in the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) and upload the resource folder into `resources` (or a `[category]` inside it). For large resources like MLOs and vehicle packs, [SFTP is faster](/server/file-management), and you can drag entire folders across. Add a line to your [server.cfg](/games/fivem/server-cfg): ```bash theme={null} ensure coolscript ``` `ensure` starts the resource at boot (and restarts it if it's already running). You reference the folder name only, never the category, so `ensure coolscript`, not `ensure [standalone]/coolscript`. Restart the server, then watch the live console. A healthy start looks like `Started resource coolscript`. Red error lines mean something is wrong; see troubleshooting below. ## Start Order and Dependencies Resources start in the order of their `ensure` lines in `server.cfg`, top to bottom. Most script errors on fresh servers come from wrong ordering: ```bash theme={null} # 1. Database connector first ensure oxmysql # 2. Framework core next ensure qb-core # 3. Framework modules and everything else after ensure qb-police ensure coolscript ``` Many resources also declare a `dependency` in their `fxmanifest.lua`, so read each resource's README, since some require specific libraries (e.g. `ox_lib`) to be started first. ## Framework Resources vs. Standalone * **Framework resources** are built for ESX, QBCore, or Qbox and call into the framework's core (`es_extended`, `qb-core`). They only work if the matching framework is installed and started first, so a QBCore job script will not run on an ESX server. * **Standalone resources** work on any server without a framework. Releases usually state "standalone" explicitly. Always check which framework (and version) a resource targets before installing it. ## Troubleshooting The folder name doesn't match your `ensure` line, the resource is nested one folder too deep, or it's missing `fxmanifest.lua`. Verify the path in the File Manager. A dependency isn't started, or it starts after this resource. Move the dependency's `ensure` line higher in server.cfg, and confirm the resource matches your framework. Check the resource's config file (usually `config.lua`), since many scripts ship disabled or with placeholder job names/coordinates. Also check the F8 client console for client-side errors. Every resource costs performance. Use the `resmon` command in the F8 console (as admin) to spot resources with high ms usage, and remove or replace the heavy ones. Take a [backup](/server/backups) before installing a batch of new resources, because rolling back is much faster than untangling a broken load order. ## Next Steps Understand the file where all your ensure lines live. Grant yourself permissions to use admin-only resources. Big resource collections love fast disks and CPUs, so run FiveM hosting from **€4.80/month** on NVMe and Ryzen hardware at Wasabi Hosting. # FiveM Server Hosting - Getting Started Guide Source: https://docs.wasabihosting.com/games/fivem/introduction Everything you need to know about FiveM server hosting at Wasabi Hosting - roleplay frameworks, txAdmin, resources, and instant GTA V server setup. Welcome to FiveM server hosting at Wasabi Hosting! FiveM is the [Cfx.re](https://cfx.re) multiplayer platform for Grand Theft Auto V that lets you run fully customized dedicated servers: roleplay cities, freeroam lobbies, racing communities, and everything in between. This page explains how FiveM works and points you to the right guide for each step of building your server. ## What Is FiveM? FiveM runs alongside your normal GTA V installation as a separate multiplayer client. It connects players to community-run servers instead of Rockstar's official ones, which means: * **It does not modify GTA: Online.** FiveM keeps its own game files and does not touch your GTA:O characters, progress, or account standing. * **Servers are fully scriptable.** Server owners add custom jobs, vehicles, maps, economy systems, and game modes through Lua, JavaScript, and C# resources. * **Players need a legal copy of GTA V** (Steam, Rockstar Games Launcher, or Epic Games Store) plus the free FiveM client from [official FiveM site](https://fivem.net). Every FiveM server requires a free **Cfx.re license key** from the [Keymaster](https://keymaster.fivem.net). You'll generate one during setup; see the [txAdmin Setup](/games/fivem/txadmin-setup) and [server.cfg](/games/fivem/server-cfg) guides. ## Frameworks: ESX, QBCore & Qbox Most roleplay servers are built on a **framework**, a bundle of core resources that provides jobs, money, inventories, and character management out of the box: | Framework | Best For | | -------------- | -------------------------------------------------------------------------- | | **ESX** | The longest-running RP framework with a huge library of compatible scripts | | **QBCore** | Modern, popular framework with an active community and many free resources | | **Qbox** | A community-driven fork of QBCore focused on performance and code quality | | **Standalone** | Freeroam, racing, or minigame servers that don't need an RP framework | You don't have to assemble a framework by hand, because txAdmin's setup wizard can deploy a ready-to-play ESX or QBCore base in a few clicks. ## txAdmin: Your Management Dashboard Every FXServer ships with **txAdmin**, a web-based control panel for your FiveM server. It handles server deployment, live console access, player management, bans, restart schedules, and announcements. It works hand-in-hand with the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com), which covers files, backups, and scheduling at the hosting level. ## Guides Install the FiveM client and connect via the server list, direct connect, or join links. Link your Cfx.re account and deploy a framework with the setup wizard. Understand every important line of your server's main configuration file. Add scripts, maps, and vehicles to your server the right way. Set up txAdmin admins and in-server ACE permissions. Protect your server data with one-click and scheduled backups. ## Why Host FiveM at Wasabi Hosting? FiveM's main server thread is heavily dependent on **single-core CPU performance**, so a busy roleplay server with hundreds of resources will lag on weak, oversold hardware no matter how much RAM it has. Wasabi Hosting is built for exactly this workload: * **Top-tier CPUs**: AMD Ryzen 7950X3D and 9950X processors with DDR5 RAM and NVMe SSDs, among the fastest single-thread performance available for game hosting. * **DDoS protection included**: GCore protection with over 200 Tbps of filtering capacity at no extra cost, essential for public FiveM communities. * **Three locations**: Amsterdam (NL), Frankfurt (DE), and Ashburn (US East), on our own network (AS215370) and our own hardware. * **Instant setup**: your server deploys automatically about 2 minutes after payment. * **Full control**: live console, File Manager, [backups](/server/backups), schedules, startup parameters, [sub-users](/server/sub-users), and SFTP access via the Game Panel. * **Painless upgrades**: grow your city and upgrade at any time while keeping all your files. FiveM server hosting from **€4.80/month**, online roughly 2 minutes after payment, with Ryzen performance, DDoS protection, and 24/7 support included. ## Need Help? Our team is available around the clock. Open a [support ticket](https://billing.wasabihosting.com/submitticket.php), join our [Discord](https://discord.wasabihosting.com), or email [hello@wasabihosting.com](mailto:hello@wasabihosting.com). # How to Join a FiveM Server - Connect to Your GTA V Server Source: https://docs.wasabihosting.com/games/fivem/join-server Install the FiveM client and connect to your FiveM server hosting at Wasabi Hosting via the server list, direct connect, or cfx.re join links. Once your FiveM server at Wasabi Hosting is online, connecting takes less than a minute. This guide covers installing the FiveM client and the three ways to join a server: the in-game server list, direct connect, and cfx.re join links. ## Install the FiveM Client FiveM requires a legitimate copy of **Grand Theft Auto V** purchased through Steam, the Rockstar Games Launcher, or the Epic Games Store. Make sure the game is installed and has been launched at least once. Get the client from the [official FiveM site](https://fivem.net). Only download FiveM from this domain, because third-party mirrors are a common source of malware. Run the downloaded file. FiveM installs into its own folder and keeps separate game files, so it does **not** modify your GTA V installation or affect GTA: Online. Start FiveM and sign in with (or create) a free **Cfx.re account**. Many servers use this account as one of your player identifiers. ## Find Your Server Address Your server's IP address and port are shown in the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) on your server's overview page. FiveM servers use port **30120** by default, so your address looks like `203.0.113.10:30120`. ## Ways to Connect 1. Launch FiveM and click **Play**, then browse or search the server list. 2. Type your server's name (the `sv_hostname` from your config) into the search bar. 3. Click the server to connect. New servers can take a few minutes to appear in the list after their first start, and only show up with a valid Cfx.re license key set. Use direct connect in the meantime. The fastest and most reliable method: 1. Launch FiveM and press **F8** to open the console (works in the main menu and in-game). 2. Type the connect command and press Enter: ``` connect 203.0.113.10:30120 ``` You can also use the **Direct Connect** option at the bottom of the server list and paste the same `IP:port`. Every listed server gets a short join link like `cfx.re/join/abc123`. You can: * Paste it into the F8 console: `connect cfx.re/join/abc123` * Open it in a web browser, which launches FiveM and connects automatically. Join links are ideal for sharing in Discord because they keep working even if your server's IP changes. ## Add Your Server to Favorites In the server list, hover over your server and click the **star icon** to add it to your **Favorites** tab. Combined with the **History** tab, this makes reconnecting after restarts effortless, with no need to remember the IP. ## Troubleshooting * Fresh servers take several minutes after startup to be indexed in the public list. * The list requires a valid `sv_licenseKey` from the [Keymaster](https://keymaster.fivem.net); check the [server.cfg guide](/games/fivem/server-cfg). * Check the console in the Game Panel for errors during startup. * Direct connect with `connect IP:30120` always works, even before the server is listed. If the server sets `sv_enforceGameBuild` (for newer DLC content), your FiveM client switches to that build when connecting, which can trigger a short download or a client restart. If the connection fails: * Make sure your FiveM client is fully updated (restart the client to pull updates). * Verify your GTA V installation is up to date in Steam/Rockstar/Epic. * Ask the server owner which build is enforced; very new builds may require the FiveM "beta"/latest update channel in FiveM settings. * Confirm the server shows as **Online** in the Game Panel and the console has finished loading all resources. * Double-check the IP and port; the default is `30120` unless you changed it. * Make sure no rule in the [Firewall Manager](/firewall-manager) is blocking your connection. * Try `quit` in the F8 console and restart FiveM to clear a stuck session. Long load times are usually server-side: a resource failing to start or a heavy loading screen resource. Check the live console in the Game Panel for red error lines, and see [Install Resources](/games/fivem/install-resources) for how to spot a broken resource. ## Next Steps Now that you can connect, set up your management dashboard and permissions: Deploy a framework and manage your server from the web. Give yourself and your staff admin permissions. Get FiveM server hosting from **€4.80/month** at Wasabi Hosting, deployed in about 2 minutes with DDoS protection included. # FiveM server.cfg Explained - Full Configuration Guide Source: https://docs.wasabihosting.com/games/fivem/server-cfg Understand every important line of server.cfg on your FiveM server hosting at Wasabi Hosting - license key, OneSync, game builds, resources, and more. `server.cfg` is the heart of every FiveM server: it sets your server name, player slots, license key, which resources start, and in what order. This guide breaks the file down line by line so you know exactly what to change and what to leave alone. Edit it through the **File Manager** in the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com) or via [SFTP](/server/file-management). ## A Typical server.cfg ```bash theme={null} # Network endpoints (keep these as-is) endpoint_add_tcp "0.0.0.0:30120" endpoint_add_udp "0.0.0.0:30120" # Server identity sv_hostname "My City RP | Serious Roleplay | discord.gg/mycity" sets sv_projectName "My City RP" sets sv_projectDesc "A serious roleplay community with custom jobs and vehicles." sets locale "en-US" sets tags "roleplay, economy, custom" # Player slots sv_maxclients 48 # License & API keys sv_licenseKey "cfxk_xxxxxxxxxxxxxxxxxxxx_xxxxx" set steam_webApiKey "YOURSTEAMWEBAPIKEY" # Core settings set onesync on sv_enforceGameBuild 3095 sv_scriptHookAllowed 0 # Resources (order matters) ensure mapmanager ensure chat ensure spawnmanager ensure sessionmanager ensure basic-gamemode ensure hardcap # Permissions (see the Add Admins guide) add_ace group.admin command allow add_principal identifier.fivem:1234567 group.admin ``` ## Line-by-Line Breakdown ### Network Endpoints `endpoint_add_tcp` and `endpoint_add_udp` tell FXServer which IP and port to listen on. FiveM uses port **30120** (both TCP and UDP) by default. On Wasabi Hosting these are pre-configured to match your allocated port, so don't change them unless support tells you to, or the server will fail to bind. ### Server Identity | Setting | Purpose | | --------------------- | ----------------------------------------------------------- | | `sv_hostname` | The name shown in the in-game server list | | `sets sv_projectName` | Project name shown prominently in the modern server list UI | | `sets sv_projectDesc` | Short description shown under the project name | | `sets locale` | Your server's primary language (e.g. `en-US`, `de-DE`) | | `sets tags` | Comma-separated keywords players can filter by | ### Player Slots `sv_maxclients` sets the maximum number of players. Values above 48 require OneSync (see below). Keep the slot count realistic for your plan's resources, since more slots means more CPU and RAM usage. ### License Key `sv_licenseKey` is **required**, and the server won't start without a valid key. Generate one for free at the [Cfx.re Keymaster](https://keymaster.fivem.net) (sign in, click **New server**, register your server's IP, copy the key). One key is valid for one server at a time. ### Steam Web API Key `set steam_webApiKey` is optional but recommended: it enables **Steam identifiers** for players who launch through Steam, which many admin and whitelist scripts rely on. Create a free key at [Steam Web API key page](https://steamcommunity.com/dev/apikey). ### OneSync `set onesync on` enables OneSync, FiveM's modern entity synchronization system. It's required for more than 48 players (up to 2048 slots) and expected by virtually all modern frameworks and scripts. Leave it on unless a legacy resource explicitly requires otherwise. ### Enforced Game Build `sv_enforceGameBuild` locks the server (and connecting clients) to a specific GTA V DLC build, for example `2802` (The Criminal Enterprises), `2944` (San Andreas Mercenaries), or `3095` (The Chop Shop). Newer builds unlock newer vehicles, weapons, and map content, but every resource that references DLC content must support the build you pick. ### Script Hook `sv_scriptHookAllowed 0` blocks clients from using ScriptHookV-based single-player mod menus on your server. **Keep this at `0`**, because allowing it opens the door to client-side cheating. ### Resource Start Order Each `ensure resource_name` line starts a resource at boot. Resources start **top to bottom**, so dependencies (framework core, database connector) must appear before the scripts that use them. See [Install Resources](/games/fivem/install-resources) for details. ### Permissions Preview `add_ace` and `add_principal` lines define admin permissions using FiveM's ACE system, for example granting `group.admin` access to commands and assigning players to that group by identifier. This is covered fully in the [Add Admins guide](/games/fivem/add-admins). ## Applying Changes Changes to `server.cfg` take effect only after a **server restart**. Save the file, then restart from the Game Panel or from txAdmin. ## Common Mistakes Nothing breaks, but nothing happens either, because the file is read once at startup. Always restart after saving. Some hosting setups also regenerate or cache configs, so verify your change survived the restart by checking the file again. The most common startup failure. The console will show an authentication error and the server stops or stays unlisted. Re-copy the key from the [Keymaster](https://keymaster.fivem.net) with no extra spaces or quotes, and make sure it isn't already in use on another server. If scripts error with "attempt to index a nil value" or can't find framework exports, a dependency probably starts too late. Move framework and database resources (e.g. `oxmysql`, `es_extended`, `qb-core`) above everything that depends on them. Recipes sometimes leave duplicate lines behind. If a setting doesn't seem to apply, search the whole file, since the last occurrence usually wins. ## Next Steps Add scripts, MLOs, and vehicles with the correct load order. Full guide to ACE permissions and txAdmin admins. FiveM hosting from **€4.80/month** on Ryzen 7950X3D/9950X hardware. Upgrade any time and keep all your files. # FiveM txAdmin Setup Guide - Deploy & Manage Your Server Source: https://docs.wasabihosting.com/games/fivem/txadmin-setup Set up txAdmin on your FiveM server hosting at Wasabi Hosting - link your Cfx.re account, deploy QBCore or ESX recipes, and configure restarts. txAdmin is the web-based management interface that ships with every FXServer (the FiveM server software). It gives you a live console, player management, bans and warns, restart schedules, announcements, and, most importantly for a new server, a **setup wizard** that can deploy a complete framework like QBCore or ESX in minutes. This guide walks you through first-time txAdmin setup on your Wasabi Hosting server. ## First Start: Find Your PIN and URL When your FiveM server starts for the first time, txAdmin launches before the game server itself and prints its access details to the console. In the [Wasabi Hosting Game Panel](https://panel.wasabihosting.com), press **Start** and watch the live console. Within a few seconds the console prints a block similar to: ``` ┌─────────────────────────────────────────────┐ │ txAdmin is starting on http://:40120 │ │ Use the PIN below to register: │ │ [ 1234 ] │ └─────────────────────────────────────────────┘ ``` Note both the URL and the 4-digit PIN. The PIN is temporary, so if it expires, restart the server to generate a new one. Visit the URL from the console (txAdmin's default port is `40120`; the exact address shown in your console is always the correct one). Enter the PIN, then click **Link with Cfx.re account** and sign in. Your Cfx.re account becomes the **master admin** of this txAdmin instance, and it can never be removed by other admins. Anyone with the URL and a valid PIN can claim your txAdmin instance. Complete the registration right after the first start, and never share the PIN. ## The Setup Wizard After linking your account, txAdmin runs a one-time setup wizard. This is txAdmin's internal profile name; your public server name is set later via `sv_hostname` in [server.cfg](/games/fivem/server-cfg). The easiest path for a new roleplay server. Recipes are curated templates that download and configure a full framework automatically, including: * **QBCore**: a ready-to-play QBCore base server * **ESX Legacy**: the current ESX framework baseline Recipes also set up the database connection for you, so you get a playable city in minutes. Deploy from any recipe file hosted online, useful for community-maintained templates such as Qbox. Already have server files? Point txAdmin at the folder containing your `server.cfg` and resources (upload them first via the [File Manager or SFTP](/server/file-management)), and txAdmin will manage that server without changing it. During deployment txAdmin asks for a **server license key**. Generate one for free at the [Keymaster](https://keymaster.fivem.net): 1. Sign in with your Cfx.re account and click **New server**. 2. Fill in your server details (use your Wasabi server's IP). 3. Copy the generated key and paste it into the setup wizard. The key ends up as `sv_licenseKey` in your server.cfg. Review the summary and let txAdmin deploy. When it finishes, press the big **Start** button in txAdmin, and your FiveM server boots and becomes joinable on port `30120`. ## Restart Schedules and Announcements Regular restarts keep long-running FiveM servers healthy by clearing memory leaks from resources. * **Restart schedule**: in txAdmin go to **Settings → Restart Schedule** and add times (e.g. `06:00` and `18:00`). txAdmin warns players in chat before each restart automatically. * **Announcements**: use **Settings → Discord** and the announcement options to broadcast scheduled messages in-game, or send one-off announcements from the txAdmin dashboard. Schedule restarts for your community's quietest hours, and pair them with a scheduled [backup](/server/backups) in the Game Panel shortly before the restart. ## txAdmin Backups vs. Panel Backups txAdmin does not back up your files; its "backup" features only cover its own settings and player database. For real protection: * Use the **Backups** tab in the Wasabi Hosting Game Panel for full-server file backups; see the [backups guide](/server/backups). * If your framework uses a **MySQL database** (QBCore/ESX do), make sure your backup routine includes the database, since player money, items, and characters live there. ## Next Steps Fine-tune the configuration txAdmin deployed for you. Add staff members in txAdmin and set up ACE permissions. FiveM server hosting from **€4.80/month**, with Ryzen 7950X3D/9950X performance, DDoS protection, and 24/7 support. # Garry's Mod Admin Commands & Permissions Source: https://docs.wasabihosting.com/games/garrysmod/admin-commands Essential administration commands and permission systems for Garry's Mod servers # Introduction to Garry's Mod Administration Effectively managing a Garry's Mod server requires knowledge of essential admin commands and understanding permission systems. This guide covers the most important admin tools and commands for server administrators on Wasabi Hosting. ## Admin Addon Options Garry's Mod doesn't have a built-in comprehensive admin system, so most servers use one of these popular admin addons: **ULX** (Ulysses Admin Mod) combined with **ULib** is the most popular admin system, offering extensive features and customization options. * Feature-rich with 80+ built-in commands * Group-based permission system * Customizable through config files * Well-maintained with strong community support **ServerGuard** is a premium alternative with a clean UI and robust features. * Modern, intuitive admin menu * Role-based permission system * Built-in reports and tickets system * Regular updates and professional support **FAdmin** comes bundled with DarkRP and provides basic administration tools. * Integrated with DarkRP * Simple permission structure * Lightweight implementation * Good for basic server management This guide primarily focuses on ULX commands as it's the most widely used admin system on Garry's Mod servers. ## Basic ULX Commands ### Player Management ``` !ulx bring // Teleport a player to you !ulx goto // Teleport to a player !ulx return // Return a player to their previous position !ulx teleport // Teleport to where you're looking !ulx spectate // Spectate a player !ulx sslay // Force a player to commit suicide !ulx slap [damage] // Slap a player with optional damage !ulx whip [times] // Slap a player multiple times !ulx freeze // Freeze a player !ulx unfreeze // Unfreeze a player !ulx god // Make a player invulnerable !ulx hp // Set a player's health !ulx armor // Set a player's armor !ulx strip // Remove a player's weapons !ulx noclip // Toggle noclip for a player ``` ### Server Management ``` !ulx kick [reason] // Kick a player from the server !ulx ban [minutes] [reason] // Ban a player !ulx banid [minutes] [reason] // Ban a SteamID !ulx unban // Unban a SteamID !ulx adduser // Add a user to a group !ulx removeuser // Remove a user from their group !ulx userallow // Allow a user to use a command !ulx userdeny // Deny a user from using a command !ulx map // Change the map !ulx maprestart // Restart the current map !ulx cexec // Force a player to execute a command !ulx rcon // Execute a console command !ulx exec // Execute a config file !ulx luarun // Run Lua code ``` ### Utility Commands ``` !ulx who // List players and their ranks !ulx motd // Show the MOTD (Message of the Day) !ulx help // Show ULX help !ulx cvar // Show the value of a console variable !ulx thetime // Show the server time !ulx uptime // Show the server uptime !ulx version // Show ULX version !ulx gag // Prevent a player from using chat !ulx mute // Prevent a player from using voice chat !ulx blind // Blind a player !ulx jail // Jail a player !ulx unjail // Unjail a player ``` You can use these commands in the console with "ulx" instead of "!ulx", for example: `ulx bring playerName`. All admin commands are accessible through your Wasabi Hosting Gamepanel. ## ULX Permission System ULX uses a group-based permission system managed through ULib. ### Default Groups * **superadmin** - Has access to everything * **admin** - Has access to most commands * **operator** - Has access to basic admin commands * **user** - Regular players with minimal permissions ### Managing User Groups ``` !ulx adduser // Add a user to a group !ulx removeuser // Remove a user from their group !ulx userallowid // Allow a SteamID to use a command !ulx userdenyid // Deny a SteamID from using a command !ulx groupallow // Allow a group to use a command !ulx groupdeny // Deny a group from using a command ``` ### Creating Custom Groups To create custom groups, edit the `data/ulib/groups.txt` file or use these commands: ``` !ulx creategroup // Create a new group !ulx setgroupcantarget // Set which groups this group can target !ulx addgroup // Add a group that inherits permissions !ulx renamegroup // Rename a group !ulx deletegroup // Delete a group ``` ## FAdmin Commands If you're using DarkRP's built-in FAdmin system: ### Player Management ``` /fadmin freeze // Freeze a player /fadmin chatmute // Mute a player's chat /fadmin voicemute // Mute a player's microphone /fadmin jail [seconds] // Jail a player /fadmin setteam // Set a player's team /fadmin strip // Remove all weapons from a player /fadmin give // Give a weapon to a player ``` ### Disciplinary Actions ``` /fadmin kick [reason] // Kick a player /fadmin ban